26mm RGB LED Pixels-3 pcs SMD 5050 RGB
RGB Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a 'dot' of silicone.
The dots are waterproof and r ed.
There are four flanges molded in so that you can 'push' them
into a 26mm drill hole in any material up to 1.5mm/0.06" thick
They're typically used to make outdoor signs. Compared to our other LED dots
The pixels are connected by a 3-conductor cable. Blue is +12V, Yellow is Ground, Green is Data
Data is shifted down from one pixel to the next so that you can easily
connect to the strand or attach more onto the end.
l SD controller
l Programable by Software
l Individually Control
l Conformal Coating, PVC glue protection
l IP66, Water-proof protection
l Easy installation (punching 26mm hole on metal panel)
Part Model |
Dimension |
LED QTY |
Color |
Voltage |
IP |
Beam |
Power(W) |
IC model |
SJ-IC219 |
ø26mm |
3pcs RGB |
Full color( ICRGB) |
DC12V |
66 |
120 |
0.72W |
UCS1903 |