|
Frequency Range:
|
400-470 MHZ, |
| Frequency Spacing: |
10MHZ for UHF (TC-851) RX frequency is higher than TX such as RX 450.625 mhz TX 440.625mhz |
| Duplex Band Width: |
1MHZ OR +/-500KHZ |
| Modulation Type: |
FM 16F3 |
| Operating Voltage: |
12-14V |
| standby Current: |
0.3A Rxcurrent : 0.8A Tx current:3.0A |
| Frequency Stability: |
±2.5 PPM |
| Channel Spacing: |
12.5KHZ/25KHZ |
| Li-ion Battery |
20,000mAh |
| Weight: |
Approx 4kg |
| Frequency Spacing (MHZ): |
10MHZ (400-470MHZ) |
| Max Output Power (W): |
UHF 10W (TC-851) |
| Receiving End Insertion loss (dB): |
≤2dB |
| Transmitting End Insertion loss(dB): |
<1.5dB |
| Transmitting-Receiving EndIsolation (dB) |
≥65B |
| Max VSWR: |
1.5 |
| Operating Temperature Range: |
-30--------+60℃ |
| Matched Impedance: |
50Ω |
| Receiver |
| Simplex Sensitivity: |
≥0.3uv(12dB SINAD) |
| Duplex Sensitivity: |
<3dB |
| Squelch Sensitivity |
≥0.2uv |
| Adjacent channel selectivity |
75dB |
| Spurious Radiation: |
85dB |
| Intermodulation Rejection: |
72dB |
| Residual Noise: |
－45dB |
| DEMP FO: |
6±3dB |
| Audio Output Power: |
4.0W |
| Audio Distortion: |
<5% |
| Working Mode: |
receiving mode |
| Transmitter |
| Max Output Power: |
UHF 10W (TC-851) |
| Spurious Radiation： |
75dB |
| Residual Modulation: |
－45dB |
| Audio Distortion: |
<5％ |
| Max Modulation: |
5KHZ |
| Pre-emphasis Frequencies: |
6±3dB |
| Working Mode: |
Transmitting Mode |
| CPU controller |
| Receiving-Transmitting FrequencySetting |
| Automatic Repeater Setting |
| PC Programming |
