Plastic irrigation buried waterproof cable junction box mainly used in wire and cable, communication cable and signal cable connection at protection.
 This product is curing, will not have any water and air and the cable connection point generating contact, all can be directly buried underground. Yueqing City, Shanghai Kang Electric Co., Ltd. of Glue-buried cable waterproof junction box with waterproof moisture-proof, explosion-proof, anti-spark, acid and alkali resistance, good looks, stable quality, fully insulated conductive, anti-impact deformation characteristics. Widely used supply, communications, municipal, irrigation, landscape, street lamps, tunnel and other fields. Buried irrigation plastic cable tie twenty years has been successfully used in a foreign country, in our country is also a lot of use.
This product has the following characteristics:
1, applies to all low voltage power cables, communication cables and signal cables. 2, using advanced resin pouring technology, safe and easy, and quick. 3, advanced cable branch connector, saving space and cables. Excellent waterproof insulating effect and excellent mechanical protection.
Installation instructions: 1. Stripped cable need junction rind, the length should be less than the mold box; 2. Use one connection, branch or docking, it is recommended that the use of insulation piercing connector; 3. Sponge strips wrapped around the cable connection both ends, close the mold box; 4 A and group B resin by a certain percentage mixed, stir the mold box, the installation of 5 resin curing speed related to temperature, the higher the temperature curing more fast, approximately one hour at room temperature;
 Note the following: Be sure to use and perfusion filled resin process must fully uniform deployment of resins A, B material 2, immediately to the already mixed resin into the branch box, such as the time delay for too long the resin thickens even curing. 3, the installation of the best gloves. 4, the construction site should maintain good ventilation. 5, skin, eyes and resin direct contact, if it gets, please rinse with plenty of water, and medical treatment should be avoided. 6, not perfusion in a ventilated shade resin, resin non-exposure, or together with other promoting blood products. Perfusion after all the garbage in the trash.