Canberra is a hot-pressed non-woven, use of polyamide 100% ( POLYAMIDE, polyester ) as raw material, after the high temperature of 220 degrees Celsius hot formed. The specific process: the whole packet of polyester fiber after opened, after opening machine for opening, and then through the feeder feeding, after paving machine shop, chemical fiber into soft smooth floors. Finally reached the hot roll, after high temperature ( usually around 220 degrees C ), fiber entangled with each other, become a cloth-like. Nylon Canberra currently main machine used for maximum width: 60'' ( 1.524 meters), weight of the main range: 120 grams per square meters to 180 g / m2. According to the above different hot pressing roller lines, divided into : the word lines, cross grain, herringbone, T word lines. Canberra polyester by low temperature dyeing with a variety of different colors. Dyeing of polyester Canberra cloth is more demanding, requiring cloth mesh uniform, weight deviation of not too big, but should not have pits and visible scars. Canberra polyester using non-woven manufacturing process, therefore has the production efficiency. High rate, large output characteristics . Polyester materials with wear resistance, safety shoes, boots and a good choice for outdoor use. In addition, have also been used for bags and boat material. As wear-resistant material, its use is PP cross lines of Canberra