Abrasive grade zirconia aluminum oxide/za is produced by putting rich aluminum, zirconium materials and additives in electic furances, smelting with high temperatureabove 2000 degrees Celsius,cooling down with special technology, and compacting with Barmac plastic,which has the characteristiss of tenacious texture, dense structure and high strength.

This product is not a kind of aenoir abrasive, but can be also used as high-grade refractory. It takes the advantages of high strength, high toughness, high temperature resistance, which can manufacture heavy-duty wheel with high performance, and has achieved very good results in grinding steel, cast iron, heat-resistant steel, titanium alloys, aluminum alloys and tungsten alloy. And it is widely used in the production of refractories in the steel industry such as continous casting and rolling, flow channel, and glass kin as well.

Zirconia Aluminum Oxide, Zirconia Fused Alumina, Zirconica Corundum, Especially suitable for snagging billets of stainless steel, carbon steel, alloy steel, etc.

Chemical composition(%)

Al2O3 content=56%
ZrO2 content=38%
SiO2 content=0.4%
TiO2 content=0.4%
Fe2O3 content=0.3%

Color
Grey

Shape
Blocky, tough and sharp

Crystal Form
Alpha-alumina,a-Al2O3,Al2O3-ZrO2.combined tree system

True Specific Gravity
4.60g/cm3

Melting Temperature
About 2000 Degrees Celsius

Magnetic Material
0.030%

Bulk Density(g/cm3)
2.24-2.18