Email:lily@taijigas.com
Mobile:86-15355070325
MSN:lily@taijigas.com
QQ:291232871




How it works:

At a certain temperature, the residual oxygen in the nitrogen and carbon contained catalyst carbon oxidation reaction occurs to produce carbon dioxide by pressure swing adsorption process to remove, and then after a high-precision filters, high purity nitrogen.

Technical characteristics:

Efficient carbon catalyst, advanced technology, good stability, high purity nitrogen;
Nitrogen, hydrogen, applies strict requirements place on the hydrogen and oxygen;
Deoxidation and a heater with high temperature materials, safe and reliable;
Increase in preheater device, heat recyclable deoxidation in the deoxy nitrogen, can save over 30% of energy consumption;
Adsorption dryer to remove the CO2 and the depth of dehydration, adsorption capacity, adsorption time, low energy consumption;
The dideoxy tower structure with a prepared, can be added to the continuous use of carbon catalyst to meet the user's continuous without stopping the machine;
Deoxidation tower carbon catalyst after use free of impurities and residual toner, no need to purge carbon catalyst can be added directly;
Imported PLC control, safe and reliable;
Automatic interlock shorting a variety of fault alarm.
Technical indicators:

Production of nitrogen products: 10Nm3 / h ~~ 500Nm3 / h
The raw material nitrogen purity: ≥ 99.9%
Finished product nitrogen purity: ≥ 99.9995%
Oxygen content: ≤ 5PPm
Carbon dioxide levels: ≤ 3PPm
Dew Point: ≤ -60 ℃