Mechanical Cleaning Filter Vessel

Design for high viscous and abrasive liquids

Durable performance with unique bridge actuator system

Part Number: UMCF-16

 

Our mechanically cleaned filter system designed to handle to filter 20 micron and larger in various industries where high particle contect, viscous and sticky liquid.

 

The system contains a cylindrical filter screen, liquid flow through the screen and dirt retain on the inner surface of the screen (with define filtration opening).

 

Clean disc moving up and down continuously to remove the dirt, and discharge from drain valve at periodical time.

 

Clean disc made by special grade of Teflon disc has a doctoring and wiping edge, both edges are pressed tightly against the screen by mechanical loading.

 

Product Features

- Automatically cleaning, filtered fluid automatically exiting.

- Eliminate the high running cost of disposable type filter cartridges and bags.

- Constant and low differential pressure filtration.

- No service interruption to change filter element, high productivity.

- Pneumatic driven, no need of electric power, safe, reliable and economic.

- Wide applications, mainly for high viscosity, corrosive liquid, viscosity up to 1000000cp.

 

UMCF-16 Specifications

- Filtration surface: 3935 cm2

- 100um maximum flow rate: 6.8-45.4 m3/hr

- Maximum operating pressure: 10 bar

- Maximum operating temperature: 160 Deg C

- Surface finish: Glass bead blasted (standard)

 

UMCF Engineering Specifications

 

Specification / Type	UMCF-4	UMCF-8	UMCF-16
Filtration Precision	25um - 400um	25um - 400um	25um - 400um
Total Volumetric Capacity	3.5liters	14.8liters	41.6liters
Purge Chamber Capacity	119ml	0.74liters	6liters
Filtration Surface	722cm2	1703cm2	3935cm2
100um Max flow rate (m3/hr)	0.45-6.8m3/hour	2.27-13.6m3/hour	6.8-45.4m3/hour
Temperature, maximum (℃)	160 ℃	160 ℃	160 ℃
Pressure, maximum	21bar	10bar(standard)	10bar(standard)
Single Unit Weight	16kg	34kg	97.5kg
Service Height	1556mm	1760mm	2591mm
Air for Actuator Drive, min.	4bar@8.5 m3/hr	4bar@8.5 m3/hr	5bar@8.5 m3/hr
Material of Construction	All Wetted Parts	Type 304 or 316L stainless steel
	Filter Element
Standard Inlet/Outlet	1 1/2” BSP socket	2” Flange	3” Flange
Surface Finish	Glass bead blasted (Standard)

 

Self Cleaning Filter Systems Operation Principle

Raw liquid enters via the inlet and travels from the inside to the outside of the filter media, contaminants are retained on the inside, clean filtered liquid exits via the outlet. The cleaning disk travels down and then back up by the use of a pneumatic cylinder.

The flow pattern concentrates contaminants at the bottom of the filter housing and the concentrated solids are periodically purged. Purging lasts less than one second, releasing only the volume of the collection chamber and avoiding process interruptions. Self Cleaning filters are ideal for continuous flow (and therefore batch) applications. In every case, these filters offer significant advantages over alternative filter designs.

 

Contact us: +86-21-59238005

Website: www.precisionfiltrationsh.com