Air-to-Air Thermal Chambers

Product Description:

The Air-to-Air Thermal Chambers series is a high-quality system proven with over 10 years of sales to major electronics, automotive, and aerospace manufacturers. With a temperature range of -65 to 150°C, the units are ready for the most extreme test applications. There are various size chambers available: 50L, 80L, 108L, 216L...

This series is distinguished by it's clean look, advanced touch-screen controller, and innovative hot/cold transfer system. Performance is able to meet strict Mil-Std test specifications, which require temperature recovery to be measured in the worst-case product sample.

Cooling Method:

Ait-to-Air Thermal Chambers

• Non-CFC cascade refrigeration system using semi-hermetic Tecumseh compressors
• Two ¾ hp blower motors circulate the conditioned air (one per zone)
• Cold storage mass maximizes cooling capacity.
• Standard dry air purge system extends the time between defrost cycles
• Hinged service access doors with lockablesnap-action latches
• Three levels of overheat protection and two levels of overcool protection
• Optional air-cooled condenser for sites where cooling water is not available.

Technical parameters:

Air-to-Air Thermal Chambers

Product feature:

Air-to-Air Thermal Chambers

1, The machine is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.

2, The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.

3, High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.

4, Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.

5, Both 2 zone and 3 zone shocks can be chosen.

6, All equipment is fully automatic, and all process are precisely controlled with P.L.C.S.

7, Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.

8, Machine can be shut down automatically in case of electrical power instabilities.