Feature Overview

This is an intelligent battery charger, which adopts advanced high frequency switching mode power supply technology, and Pulse Current. The charging or recovery process is controlled intelligently by a high performance microprocessor.

 Approved battery charge algorithms for ideal charging, which can not only make the charging with high efficiency, but also can resume the battery capacity and increase the battery life span. Fully sealed enclosure witch provides improved reliability in demanding environments, and the advantages of light weight, compact size and long life design make the charger more competitive than any other battery chargers

Some charger modules can be used in parallel directly to increase charging current and realize fast-speed charging.

 Specifications

AC Input Voltage:           AC110V±10%

or AC220V±15%

AC Input Frequency:         45Hz to 65Hz

Max AC Input current:       14A@110V, 7A@220V

DC Output Voltage:          See the Type Table

DC Output current:          See the Type Table

Maximum Efficiency:        more than 90%

Environmental Enclosure:     IP32

Immunity-Europe:           EN61200-4-2/3/5/6/11

Safety-North America:       UL2202/UL1564 2nd Edition

Shock & Vibration:        SAEJ1378

Operating Temperature: -20 Celsius degree to +50 Celsius degree(-22-122)

 Operation Indication

Stand By: POWER LED is on

Self-checking: Battery is connected, all green LEDs are flashing 15 times, and the fan is running rapidly.

Pulse current charging: RUN LED is on, and the other four little LEDs indicate the volume of the battery step by step.

100% Charge Indicator: All LEDs except the led of RUN LED are on. The charger stops charging and the fan stops.

 Protection Indications

Over current: Electronic current limit, manual reset.

RUN LED is off; the two middle LEDs of Volume are on.

Thermal Protection: Shut down if thermal is over 85 °C, auto-reset.

RUN LED is off; the two LEDs of Volume are flashing.

Over-time protection: Shut down.

RUN LED is off; the three LEDs of Volume are on.

Battery Fault: Shut down, auto-reset.

RUN LED is off; the four LEDs of Volume are flashing

Reverse Polarity: Electronic protection, auto-reset.

 

 Type Table

Type             Battery Voltage     Charge current

ipCHPC-2440        24V               40A

ipCHPC-3630        36V               30A

ipCHPC-4830        48V               25A

ipCHPC-6025        60V               20A

ipCHPC-7220        72V               16A

（Note: the type of battery is marked on the charger）