Sintered Powder Filter Disc Feature

1. Sintered powder filter disc is made from stainless steel powder particle or titanium powder particle

2. Sintered powder filter disc is sintered in a high temperature vacuum furnace. So stainless steel powder particle or titanium powder particle will not shed

3. Sintered powder filter disc is surface filtration and depth filtration

4. Sintered powder filter disc has narrow pore size distribution

5. High dirt holding capacity

6. Good porosity

7. High filter rating accuracy

8. The effect of filtration is good

9. High filter efficiency

10. Good permeability

11. Pressure loss is low in filtration process

12. High flow rate at low differential pressure

13. High compression strength

14. Good mechanical strength

15. Good abrasion resistance

16. Good durability against most liquids, gases and aggressive steam

17. High temperature resistance

18. High corrosion resistance

19. Backwash

20. Washable and Cleanable

21. Reusable

22. Long service life

 

Sintered Powder Filter Disc Technical Data

Raw Material: SS 316L,Titanium

Filter Rating: 0.22-100 Microns

Operation Temperature: ≤816 ℃

Diameter: ≤400 mm

Thickness: 1 mm,1.5 mm,2 mm,3 mm,5 mm or others

 

Application

Sensor, inductor, detector, survey meter, pressure release device, polymer extrusion device, polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry