1. Introduction

Hall Effect Flow Sensor

Model: USC-HS21TA

Explanation:

US: UltiSensor; N: Nylon; C: Copper H: Hall Sensor; S: Straight; 41:G1/4,6mm; P: Plug; T: Threaded; 

E: Elbow; T: Threaded; 21: G1/2’; 43: G3/4”;  A: Type A

Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.

Calculation Formula: F(Hz)=56*Q(L/min)

Note:

1. When magnetic material is close with the sensor, its characteristics may vary.

2. In order to avoid particle debris, the sensor must be installed after a filter.

3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.

2. Features:

4. Copper material, environmental friendly material, small, flexible and functional.

5. Intubation design of inlet and outlet pipe, easy connection and operation;

6. Imported Hall IC from Japan, stable and reliable;

7. Range: 1-30L/min;

8. working voltage: DC3-18V;

9. rated voltage: DC5V;

10. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below

11. Pulse output duty cycle: 50+-10%

12. Insulation resistance: 100M Ohm and above;

13. Tightness: Seal up all the holes, and inflate with 1.7MPa water, after 1 minute, no leakage and deformation;

14. -20-80 centigrade;

15. One year warranty