SMD component automatic test packaging machine
model:ATF-10
Use: the taping packages of a variety of surface mounting devices(SMD).
Capability and parameter
·Applicable types of components:can be customized for components of your company;
·Specifications of carrier tapes:8-44mm tape width;
·Production capacity of the machine:(based on the specifications of component);
·Specifications of machine tapes:as for different components,the fixture can be replaced for hot pressing or cold seal packaging of 8 to 44mm wide tapes;
·Power supply:AC220V±20%/50HZ,5A;
·Compressed air supply:0.3~0.6Mpa/60L/Min;
·Loading mode:materials are loaded by the vibrating disk, and the feeding speed is 160 pieces per minute ;
·Working environment:clean room,the temperature of no more than 0 to 50℃ and humidity of no more than 35 to 85%,without condensation;
·The detection speed of visual system:150ms/pc,detection accuracy of more than 0.1mm,and the erroneous recognition of no more than 1‰;
·Machine size:L1520mm×W930mm×H1585mm
·Other requirements:to be customized according to customer requirements by consultation。
·Operating temperature :0℃(32℉)to 45℃(113℉)
·Humidity:90%,without condensation
·Vibration:10-2000Hz,10G,according to IEC68-2-6