Double sides tape jumbo rolls

Product Name: hot melt double-sided tape
Tape consists of:
Release: release paper
A surface adhesive: hot melt adhesive
Substrate: tissue paper
B surface adhesive: hot melt adhesive
Physical properties:
Total thickness: 80 ± 5um 90u ± 5um 100 ± 5um (The company mainly produces 80U 90U 100U three

specifications)
initial tack> 8
180 ° peel force (the stainless steel plate)> 1.1kg/25mm
holding force of> 10hrs
tensile strength> 7N/cm
The above data is based on GB4852-84, GB-2792-81, GB-7753-84 test method to detect reliable test

results
But does not represent the guaranteed value of the product, due to environmental changes, the test

results may vary, the numerical deviation ± 5%, mass production and the use of bigger and then Try

qualified.
Characteristics and Uses:
Senior white tissue paper substrate, solvent-based polyacrylate adhesive coated both sides covered,

then covered with easy to peel the timber is made of;
Good initial tack and adhesion good, and easy to use cold resistance, good heat resistance; the plastic

surface equatorial good; apply to leather, gift wrap and footwear adhesive stickers, stationery,

office.