LED Machine Tool Lighting Lamp

Model:	T5W08-BB
Brand:	Belighting
Origin:	Made In China
Category:	Consumer Electronics & Lighting / Lighting / Bulb & Lamp
Label:	machine tool light , machine tool lamp , LED light
Price:	US $1 / pc
Min. Order:	200 pc

Inquire Now

Product Description

Model Number:BLT5W08-BB-06-AC36

LED Lamp Bead:144PCS /SMD3020

Contour Dimension: diameter 13mm, Length:1200mm

Lamp Body：aluminium alloy+PC

Viewing Angle: 180°

Power Consumption: 8W

Input Voltage: AC36V/220V/50HZ--60HZ

Color Temperature:6500K(white light)

Luminous Intensity:800 lumens

Compare with fluorescent tube:18W

Efficiency: greater than 90%

Performance Factor: greater than 0.65

Protection Grade:IP60

Continuous Working : 10000 hours(25 degree ), 20000 hours(0～－30 degree)

Attenuation Ratio:1% 1000 hours(55 degree)

Working Life: greater than 50000 hours

The series of the JM machine tool LED lights is designed for the small and medium size machine tool, numerical control machine, milling and drilling machine, modular machine tool and other equipments lighting by our company .Our LED lights is application to Alternating Current12v/ 24v/36v/220v.

The light cover adopts the fireproofing material, and the advantage is waterproof, anti-explosion and weatherproof. The integral structure of the light body is heat emission ,not only the surface look nice but also the light working temperature is down to the best point.Because of the high quality and the advanced circuit design the light has excellent isolation, inflaming retarding, impact resistance and strong corrosion prevention advantages, and guarantee the light can work uninterruptedly in the machine tool working enviroment.The LED machine tool light can widely use in the machine tool working table and the workshop with the light distribute uniformity ,the lighting effect is favorable and long working life.

According to the low voltage, moist, safety and anti-explosion special enviroment, our company design and produce the series of LED machine tool lamps by ourselves.

According to the power supply voltage, it can divide into AC12V/AC24V /AC36V/ AC220V.

According to the connector, it can divide into E27 screw joint corn-type machine tool LED lamp, E27 screw joint horizontal plug machine tool lamp, E27 screw joint flying disk type machine tool LED light, tube –type machine tool LED lamp.

Every series of the lamp has warm light (3200k) and white light(6500k).

Advantages of the machine tool LED lamps:

1.The outer cover is made of low shrinkage not saturated polyester glass fiber reinforced plastic, with the nice appearance, light weight, open and close flexibly, use safety simpler reliably, insulation, antiflaming, impact resistance and antiseptic advantages.

2.The light transmitting cover adopt the cold resistant PC material ,on the basic of the original cover we introduce the newest and microthermal plasticizer and inhibitor, avoided easy breakage problem, with impact resistance and high light transmittance advantages.

3.Long working life: The lamp body adopt the heat dissipation over-all structure, so the working temperature is down to the best point .The working life is 50000 hours , and it can non-stop work more than 20000 hours.

4. High efficient and energy-saving: Compare with the fluorescent lamp and common energy –saving lamp, it can save electricity 70—80% and 30---40%.

5. Instant-on: response time is 100ns,open and close frequently does not impact the working life,30 degree below also can instant start.

6. Non-pollution: all the material adopts the non-pollution, non-mercury and non-lead.

7. Anti-explosion: The over-all structure adopt the safe design and against breakage.

8. Standard lamp socket: E27 lamp sockets, easy replacement, replace the fluorescent lamp and common energy –saving lamp directly.

9. Adopt the Nichia LED SMD bead, high lighting effect, low brightness decay.

Application area:

Widely used for the small and medium size numerical control machine tool,modular machine tool,machining center and general-purpose machine tool,it is suitable for the indoor lighting of the enclosed numerical control machine tool ,and the operating lighting of the armarium,vehicle repair,ship repair,equipment maintenance.