Split heat pipe solar collectors details

Model:SLB-2

Special designed for the Separated solar water heater systems. It's easy to combine with existing water heating systems. This solar collector is of excellent figure, reliable performance, low maintenance, convenient replacement. One or several glass tubes broken will not affect the operation of the whole system. Special designed for the Separated solar water heater systems. It's easy to combine with existing water heating systems. This solar collector is of excellent figure, reliable performance, low maintenance, convenient replacement. One or several glass tubes broken will not affect the operation of the whole system.

Split heat pipe solar collectors working principle:

1. The heat pipe series solar collector are always connected with existing heating supply device.

2. The selective coating on the inner Cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminium fins.

3. The liquid in the heat pipe changes into vapour which rises to the condenser.

4. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe.

5. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe.

6. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.

Heat pipe solar collectors specification
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2.0mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm
4. Insulation layer: 45mm thickness glass firber
5. Heat preservation: 72-96hrs
6. Hail resistance: 25mm
7. Max pressure: 9 bar
8. Coating of vacuum tube: Al-N-Al

9. Frame: 2.0mm thickness Aluminum Alloy