UHMWPE pipe has 2 million or more molecular weight, the smallest wear index, which makes it have a very high capacity of anti-sliding friction. Its wear resistance is 6.6 times higher than normal alloy steel, 27.3 times that of stainless steel, 17.9 times that of phenolic resin, 6 times that of nylon 6, 4 times that of polyethylene, and it increases the life of the pipeline substantially.
2.Very high impact resistance: 

Of the existing engineering plastics, the value of the impact toughness of ultra-high molecular weight polyethylene pipe is the highest, and many materials will crack, break, split or surface stress fatigue in the explosion of serious or repeated impact. Our products will not damage by Cantilever beam impact test according to GB1843 standards, and can bear strong external impacts, internal overload and pressure fluctuation.
3.High corrosion resistance:

UHMWPE is a kind of structure of saturated molecules, so its chemical stability is very high. It can withstand the erosion of potent chemical substances, and it is not subject to corrosion in other lye and acid except for some mild acid at high temperature outside. UHMWPE can be used in the concentrated hydrochloric acid with less than 80% concentration, and its performance is quite stable in the sulfuric acid with less than 75% concentration and in the nitric acid with less than 20% concentration.
4.High-pressuer resistance:

The working pressure is between 0.6pa to 2.0Mpa

5.Good self-lubrication:  

UHMWPE pipe contain the waxy substance itself, and its self-lubrication is very good. The frictional coefficient (196N, 2 hours) is only 0.219MN/m (GB3960), so its self-lubrication is better than steel or brass with oil lubrication. Especially its dry lubrication can be fully displayed in the poor environment and places of more dust and sand. It not only can be used freely, and can protect the workpiece from wearing or strain.

6.The unique resistance to low temperature:

The resistance to low temperature of UHMWPE pipe is excellent, and its impact resistance and anti-abrasion can’t change basically at minus 269 degrees Celsius. It is the only available engineering plastics can work at temperatures close to absolute zero. Meanwhile, the adaptable temperature range of UHMWPE pipe is large, and it can be used within -269 to 80 degrees Celsius.

7.Not easy to form dirt:

  UHMWPE pipe has excellent surface non-adhesion and surface smoothness due to its small friction coefficient and non-polarity. Existing materials form dirt usually in the medium with PH value of 9 or above, but UHMWPE pipe can’t form dirt. This characteristic has great significance to the system of discharging powder and coal ash of power plant, and is also well suited for the pipeline of crude oil, mud and so on.
8.Long life-span:

The unsaturated genes of UHMWPE molecular chain are less, and its fatigue resistance strength is more than 500 thousand times, and its Environmental Stress Cracking Resistance is more than 4000h, which is twice more than the PE. It can still maintain more than 70% mechanical properties after it is buried and used for 50 years.
9. Easy installation:

The weight of unit length of UHMWPE pipe is only one-eighth of the steel pipe, it is possible whether it is welded or connected by flange.

Applications:

1.transport  powder and coal ash in thermal power plant

2.transport  mine tailings and slurry ,metallurgical mines,in the mining industry

3.transport  pulverized coal and coal-water slurry of coal preparation plant in the coal industry

4.transport  mud and corrosive media with slag in the chemical industry

5.transport  crud oil,petroleum, food and natural gas

Specifications:

Guorun uhmwpe pipes’s outer diameter is from 65 mm to 800 mm;wall thickness is from 8mm to 38 mm