1. Features:
* Light source: 3pcs super bright 5050 SMD LEDs adopted, these LEDs are set evenly and closely on the board which make the module could achieve very high intensity.
* Professionally designed to be IP 67 protection rate.
*Beaming angle: 120 degree, high brightness output; No spot; No shadow.
* Easy installation with two mounting holes and 3M adhesive tape on the back.
* Available Color: Red, Yellow, Blue, Green, White, Warm White
*Special design of appearance makes it unique and looks nice
2. Installation Instruction:
*Distance between modules: 40~60mm
*Distance between light source and acrylic panel: 50~100mm
*Max quantity of LED modules a loop is less than 50pcs and each loop should be similar
*The calculating method of rated power is: module power consumption* module number*1.2.
For example: 100pcs CAMZ-S82-3W-T3 modules, 100*0.72w*1.2=72w, so the 100W power supply can be used.
*.The 0.75mm or 18AWG wire is always used as the cable, the distance between power outlet and the first module should be within 5 meters.
*.The power supply and the metal letter case must be connected with the ground wire.