Item: GS8-783
LED: 45+1pcs
Solar panel: 3W 9V
Battery: 4000mAh battery lamp
Charge time: 12h
Discharge time: 24h
Lantern size: 58.2*43.9*58.4cm

Features

1.Lead-acid battery rechargeable and free maintenance, with 4000mAH capacity high; Long battery life, can be used circularly 500 times above;
2.Use 45+1 environmental protection import LED, super brightness and white, it can work more than 100,000 hours; Low power consumption, with 45 LED lamps, power consumption is 3.6W , the light reach the highest brightness, can work at least 9 hours; A high power LED lighting power consumption is 1W, can work 24 hours above.
3.With energy-saving, environmental solar power and DC power adapter input port, and built-in polarity protection function;
4.The product has kinds of function for choices, “ ” file 45 LED lamps, built-in control circuit controlled by MCU touch and no chip-level brightness adjustment, adjustable light intensity, wide range of options, easy to operate; “DC” file can be not only used as lighting and also with emergency function , you can adjust the 45 LED brightness freely through rotary switch, one high power LED lighting can be used as a flashlight over long distances. Various functional selection, according to environmental requirements to better use of energy.
5.The spotlighting cup adopt high surface treatment technology, high reflective efficiency , range can reach 500 meters;
6.With hand shank and hook, easy to carry.
7.It has emergency function, is the best spare lamps for outdoor recreation, field work, family and market.
Precautions
1.For service life of the battery, the ray of the product is becoming dim obviously when it works, please stop using and charge it promptly;
2.The light of the LED lamps is ultra strong, do not shine eyes directly. (Children must use under the adult's guide);
3.The longest duration of charging cannot surpass 20 hours. (No exception for using the emergency function).
4.Please push the power switch in "OFF" position when it is not in use; please charge it every two months when not in use in a long time.
5.Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations.
Instructions
1.When charging, push the power switch to “OFF” , then put the round head into the charge seat and insert the other hand of plugs to AC 110~240V/50~60HZ power source socket, the indicator bright, it takes about 12 hours for the full charge;
2.When the power switch in "OFF" position, no touch function, no emergency function, in charge state, only for charging the battery.
3.When the power switch in " " position, the touch switch is turned on, but without emergency function; in charge state, do not affect the touch function.
There are two ways to open the lighting:
①: Touch touch-bit, lights; then touch the touch position, lights off;
②: Touch a long press, lamp brightness gradually reduced, loosen ,light levels parked in the brightness of the corresponding loosen, lamplight brightness minimum and no longer change; Then touch a long again, light levels increase gradually, loosen, light levels in loosen stop when the moment the brightness of the corresponding maximum brightness, light levels no longer changes.
4. When the power switch in "DC" position, knob switch in "OFF" position, without touch function, one high power LED can be used directly and with emergency function. In charge state, high power LED do not bright, only for charging the battery, when suddenly lose power, this time with emergency function, the LED light immediately lighting;
5. When the power switch in "DC" position, knob switch in "ON" position, without touch function, 45+1 high power LED can be used directly and with emergency function. In charge state, all LED do not bright, only for charging the battery, when suddenly lose power, this time with emergency function, the 45+1 LED light immediately lighting, and you can adjust the 45 LED brightness freely through rotary switch;
6. When use the solar to charge, the solar panel output voltage: ≥ 7V, output current: 0.6A.
7. When use the power adapter to charge, the adapter output voltage: 6V, output current: 0.6A