IDB35 Water Pump

Application

They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made.
They are suitable for domestic use and in particular for delivering water in combination with small pressure sets, as well as for irrigation.
The pumps shall be installed in enclosed places, or at least protected against inclement weather.

Working Condition
Submersion depth 8m
Liquid temperature up to +60oC
Ambient temperature up to +40 oC
Max. Working pressure: 6 bar

Structure Feature
Pump body: Cast iron
Motor Bracket: Aluminum
Impeller: Brass
Motor shaft: SS420 or CS45#
Mechanical seal: Ceramic - Graphite
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage
Fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Insulation: Class B
Protection: IP 44

Packaging detail: Wooden cases
Delivery detail: 30 days after receiving your deposit.