LED Tube
| Model: | LJ-RGG |
|---|---|
| Brand: | Blue King |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / Bulb & Lamp |
| Label: | LED Tube , LED Tube , Tube |
| Price: |
¥288
/ pc
|
| Min. Order: | 1000 pc |
Product Description
LED Tube comparison with the traditional fluorescent tube:
Emitting principle: LED lamp: support DC power supply to the light-emitting element, light emitting, no flicker; mercury-free, will not pollute the indoor and environmental.
The traditional fluorescent rely on electron bombardment mercury vapor to generate ultraviolet rays irradiated phosphor and light, electron bombardment mercury vapor, ultraviolet radiation emitting phosphor lamp process are random, discontinuous, so very serious, strobe. A 1.2 m T8 fluorescent weld about 15-25 grams of mercury, the mercury will escape, pollution of the environment with the increased use of time.
LED light energy than traditional fluorescent lamps, an LED fluorescent nodes about 50%, the of Shenzhen Blue King photovoltaic production of a fluorescent lamp 18W nominal power, 20% -30% higher than 40W fluorescent fluorescent light, the energy-saving effect alarming.
LED light long life: an LED fluorescent, if the choice of high-quality electrolytic capacitors accessories as a constant current source, a life span of over 50,000 hours, 50,000 hours lifetime can be higher than if the choice of non-electrolytic capacitor device as a constant current source accessories. The light is small: the average qualified LED fluorescent thousand-time decline of less than 3% of the traditional fluorescent lamp small-time decline of 8% or more.
LED fluorescent ultraviolet. Ultraviolet small amount of radiation is beneficial to the people. Irradiation for a long time can damage cells: such as darkening of the skin, severe induced cancer. Traditional fluorescent lamp needs ultraviolet light phosphors to light-emitting light in the ultraviolet content, long-term exposure is not conducive to health.
LED fluorescent serviceable. General failure in a constant current source, and can work just replaced the constant current source. The lamp beads failures are generally few lights beads, lamp beads making process a small amount of dead beads chip technology, as long as the replacement of old. The traditional fluorescent fluorescent lamp bad, the latter can not be repaired, and the waste is difficult to deal with, and can not be discarded, but also can not be reused.
The LED fluorescent facilitates secondary control. LED for DC power supply, the start-up time is short, almost directly start. So, with infrared control head voice head, radar lights with the realization of intelligent control. Traditional fluorescent lamps because of a slow start, is not conducive to the realization of intelligent control.
LED fluorescent tube office lighting advantage
1, environmentally friendly lamps, protect the earth; contains large amounts of mercury vapor in the traditional fluorescent broken mercury vapor will evaporate into the atmosphere. LED fluorescent lamp does not use mercury and LED products do not contain lead, play a protective effect on the environment.
Efficient light-emitting, reduce losses; traditional luminaire direction of 360 degrees, LED lighting is directional luminous, will not cause the loss of light.
3, quiet and comfortable, no noise: LED lamps do not produce noise, using precision electronic instruments occasions Choice. Suitable for a library, offices and the like occasions.
4, soft light, protect the eyes: the traditional fluorescent lamp is AC, so 100-120 times per second strobe. LED lamps directly convert the AC to DC, will not produce flicker, protect your eyes.
5, no UV, no mosquitoes: LED lamps do not produce ultraviolet light, and therefore will not like traditional lamps, there are a lot of mosquitoes around the light source side. The Indoor become more clean sanitation and clean.
Voltage adjustable 80V-265V; the conventional fluorescent lit by high voltage rectifier release, you can not light up when the voltage decreases. LED lamps can be lit in a certain range of voltage can also adjust the brightness of the light.
7, energy savings and longer life
LED fluorescent lamp power consumption is half of the traditional fluorescent lamp, life expectancy is 10 times the traditional fluorescent, long-term use without the need to replace, reduce labor costs. More suitable for occasions that are difficult to replace.
8, robust, secure, long-term use; LED lamp body is epoxy instead of the traditional glass, more robust, secure, LED also will not easily be damaged even hit the floor, you can safely use.
LED Tube Installation Notes
1, the installation:
LED comes with a constant current source, does not require rectifiers, starter. Generally over T8 lamp because the lamp space enough, the constant current source can be installed on the inside of the lamp. So, when installed, you can remove the original bracket in the rectifier, starter without lamp installed directly up on it.
T5, T5LED fluorescent lamp because the lamp is small, does not fit the constant current source, constant current source can only be mounted in the holder, so manufacturers are doing T4 \ T5 will be configured in the bracket, bracket equipped with a constant current source, and directional lamp installed. Opposite direction, the lamp is not lit. We are considering adding some conversion circuit, so that even if the lamp is installed anti circumstances, the lamp can work properly.
2, voltage: Blue King photoelectric production of fluorescent lamps have a very wide voltage adaptability, AC 85V - AC 245V, can be normal work. But the long-term voltage is too high or too low, it will affect the power factor of the constant current source, That will cause a slight impact of energy-saving effect. At the same time, it will also affect the life of the constant current source. Therefore, the general selection of appropriate voltage fluorescent tubes. Such as: mains 110V places, you should use a specially designed 110 mains fluorescent tubes.
3, cooling: Blue King photoelectric production of fluorescent lamps with aluminum enclosure's heat dissipating heat is not a problem under normal circumstances. However, where heavy dust, should regularly dust to prevent dust covering the radiator, the impact of heat.
4, Waterproof: LED fluorescent lamp because the lamp is composed of two parts from top to bottom: the upper part of the aluminum radiator for the next part of the soft mask, there are gaps in the joints, so to prevent soot, water vapor from entering. If you use heavier in the flue gas, water vapor, and s ested adding a protective cover. Usually the protective cover on it.
5, vibration: LED lamp has a strong anti-vibration ability. As long as it is not a violent shock, usually does not cause damage. Some impact but might be a soft board. Traditional fluorescent glass, which is close to the vacuum, vibration could cause an explosion, with particular attention to vibration.
LED Tube purchasing skills
Choose the right color temperature. LED fluorescent installation location, you can buy the high color temperature, such as: 6500K - 7000K., Light color seems a bit bluish. As LED light efficiency is relatively high, despite a bit harsh, but because of the installation location, direct exposure to the eye a very small chance. Kind: If the installation location, the eyes direct exposure opportunities, you should choose the color temperature low, close to daylight color temperature of 5500K - 6000K. As the softer light eyes feel comfortable.
Optional LED fluorescent tubes also need to consider the appropriate power. LED Fluorescent same energy consumption, and its luminous flux emitted difference great selection of high-quality, large luminous flux LED fluorescent alternative to the traditional fluorescent lamp, due consideration to install some less. Do not substitute with the traditional fluorescent 1:1. In this way, more energy-efficient.
Choose the right appearance: the general LED fluorescent in the concept of users are still stuck in the traditional fluorescent stage. So, no matter what the situation requires light with traditional fluorescent. Plus soft board manufacturers in the LED fluorescent tube light looks like. In fact, the soft plate light energy loss. In general between 15-30%. If the installation location is not easy, eyes often irradiated, can be considered with a transparent cover, as can choose to power small LED fluorescent light, will be more energy efficient.
Choose the right type of fluorescent tubes. Fluorescent lights use low power SMD lamp beads, overall calorific much. But if there is a better heat light fades further reduce the increase in life expectancy. The LED fluorescent form, the radiator area much larger heat Hao. If possible, try to use T8 \ T10 tubes. Of course, T10 tube shape, and its cost is also high, based on experience, T8 tube most appropriate. T4 \ T5 smaller points. Especially T4 tube, power can not choose large.
Emitting principle: LED lamp: support DC power supply to the light-emitting element, light emitting, no flicker; mercury-free, will not pollute the indoor and environmental.
The traditional fluorescent rely on electron bombardment mercury vapor to generate ultraviolet rays irradiated phosphor and light, electron bombardment mercury vapor, ultraviolet radiation emitting phosphor lamp process are random, discontinuous, so very serious, strobe. A 1.2 m T8 fluorescent weld about 15-25 grams of mercury, the mercury will escape, pollution of the environment with the increased use of time.
LED light energy than traditional fluorescent lamps, an LED fluorescent nodes about 50%, the of Shenzhen Blue King photovoltaic production of a fluorescent lamp 18W nominal power, 20% -30% higher than 40W fluorescent fluorescent light, the energy-saving effect alarming.
LED light long life: an LED fluorescent, if the choice of high-quality electrolytic capacitors accessories as a constant current source, a life span of over 50,000 hours, 50,000 hours lifetime can be higher than if the choice of non-electrolytic capacitor device as a constant current source accessories. The light is small: the average qualified LED fluorescent thousand-time decline of less than 3% of the traditional fluorescent lamp small-time decline of 8% or more.
LED fluorescent ultraviolet. Ultraviolet small amount of radiation is beneficial to the people. Irradiation for a long time can damage cells: such as darkening of the skin, severe induced cancer. Traditional fluorescent lamp needs ultraviolet light phosphors to light-emitting light in the ultraviolet content, long-term exposure is not conducive to health.
LED fluorescent serviceable. General failure in a constant current source, and can work just replaced the constant current source. The lamp beads failures are generally few lights beads, lamp beads making process a small amount of dead beads chip technology, as long as the replacement of old. The traditional fluorescent fluorescent lamp bad, the latter can not be repaired, and the waste is difficult to deal with, and can not be discarded, but also can not be reused.
The LED fluorescent facilitates secondary control. LED for DC power supply, the start-up time is short, almost directly start. So, with infrared control head voice head, radar lights with the realization of intelligent control. Traditional fluorescent lamps because of a slow start, is not conducive to the realization of intelligent control.
LED fluorescent tube office lighting advantage
1, environmentally friendly lamps, protect the earth; contains large amounts of mercury vapor in the traditional fluorescent broken mercury vapor will evaporate into the atmosphere. LED fluorescent lamp does not use mercury and LED products do not contain lead, play a protective effect on the environment.
Efficient light-emitting, reduce losses; traditional luminaire direction of 360 degrees, LED lighting is directional luminous, will not cause the loss of light.
3, quiet and comfortable, no noise: LED lamps do not produce noise, using precision electronic instruments occasions Choice. Suitable for a library, offices and the like occasions.
4, soft light, protect the eyes: the traditional fluorescent lamp is AC, so 100-120 times per second strobe. LED lamps directly convert the AC to DC, will not produce flicker, protect your eyes.
5, no UV, no mosquitoes: LED lamps do not produce ultraviolet light, and therefore will not like traditional lamps, there are a lot of mosquitoes around the light source side. The Indoor become more clean sanitation and clean.
Voltage adjustable 80V-265V; the conventional fluorescent lit by high voltage rectifier release, you can not light up when the voltage decreases. LED lamps can be lit in a certain range of voltage can also adjust the brightness of the light.
7, energy savings and longer life
LED fluorescent lamp power consumption is half of the traditional fluorescent lamp, life expectancy is 10 times the traditional fluorescent, long-term use without the need to replace, reduce labor costs. More suitable for occasions that are difficult to replace.
8, robust, secure, long-term use; LED lamp body is epoxy instead of the traditional glass, more robust, secure, LED also will not easily be damaged even hit the floor, you can safely use.
LED Tube Installation Notes
1, the installation:
LED comes with a constant current source, does not require rectifiers, starter. Generally over T8 lamp because the lamp space enough, the constant current source can be installed on the inside of the lamp. So, when installed, you can remove the original bracket in the rectifier, starter without lamp installed directly up on it.
T5, T5LED fluorescent lamp because the lamp is small, does not fit the constant current source, constant current source can only be mounted in the holder, so manufacturers are doing T4 \ T5 will be configured in the bracket, bracket equipped with a constant current source, and directional lamp installed. Opposite direction, the lamp is not lit. We are considering adding some conversion circuit, so that even if the lamp is installed anti circumstances, the lamp can work properly.
2, voltage: Blue King photoelectric production of fluorescent lamps have a very wide voltage adaptability, AC 85V - AC 245V, can be normal work. But the long-term voltage is too high or too low, it will affect the power factor of the constant current source, That will cause a slight impact of energy-saving effect. At the same time, it will also affect the life of the constant current source. Therefore, the general selection of appropriate voltage fluorescent tubes. Such as: mains 110V places, you should use a specially designed 110 mains fluorescent tubes.
3, cooling: Blue King photoelectric production of fluorescent lamps with aluminum enclosure's heat dissipating heat is not a problem under normal circumstances. However, where heavy dust, should regularly dust to prevent dust covering the radiator, the impact of heat.
4, Waterproof: LED fluorescent lamp because the lamp is composed of two parts from top to bottom: the upper part of the aluminum radiator for the next part of the soft mask, there are gaps in the joints, so to prevent soot, water vapor from entering. If you use heavier in the flue gas, water vapor, and s ested adding a protective cover. Usually the protective cover on it.
5, vibration: LED lamp has a strong anti-vibration ability. As long as it is not a violent shock, usually does not cause damage. Some impact but might be a soft board. Traditional fluorescent glass, which is close to the vacuum, vibration could cause an explosion, with particular attention to vibration.
LED Tube purchasing skills
Choose the right color temperature. LED fluorescent installation location, you can buy the high color temperature, such as: 6500K - 7000K., Light color seems a bit bluish. As LED light efficiency is relatively high, despite a bit harsh, but because of the installation location, direct exposure to the eye a very small chance. Kind: If the installation location, the eyes direct exposure opportunities, you should choose the color temperature low, close to daylight color temperature of 5500K - 6000K. As the softer light eyes feel comfortable.
Optional LED fluorescent tubes also need to consider the appropriate power. LED Fluorescent same energy consumption, and its luminous flux emitted difference great selection of high-quality, large luminous flux LED fluorescent alternative to the traditional fluorescent lamp, due consideration to install some less. Do not substitute with the traditional fluorescent 1:1. In this way, more energy-efficient.
Choose the right appearance: the general LED fluorescent in the concept of users are still stuck in the traditional fluorescent stage. So, no matter what the situation requires light with traditional fluorescent. Plus soft board manufacturers in the LED fluorescent tube light looks like. In fact, the soft plate light energy loss. In general between 15-30%. If the installation location is not easy, eyes often irradiated, can be considered with a transparent cover, as can choose to power small LED fluorescent light, will be more energy efficient.
Choose the right type of fluorescent tubes. Fluorescent lights use low power SMD lamp beads, overall calorific much. But if there is a better heat light fades further reduce the increase in life expectancy. The LED fluorescent form, the radiator area much larger heat Hao. If possible, try to use T8 \ T10 tubes. Of course, T10 tube shape, and its cost is also high, based on experience, T8 tube most appropriate. T4 \ T5 smaller points. Especially T4 tube, power can not choose large.
| Payment Terms: | Cash |
|---|---|
Member Information
| Shenzhen Blue King Optoelectronic Co., Ltd | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Manufacturer |
| Phone: | 13428986603 |
| Contact: | mr nie (Sales Manager) |
| Last Online: | 09 Nov, 2012 |
