Brief Introduction

HYM750 is Impinj INDY R2000 four ports high performance UHF reader module.

With Impinj R2000 chip, the item shows excellent working.

It is high performance reader module, suitable for developing high level long read range UHF handheld, integrative reader, fixed reader and other UHF reading device.

 

Description

HYM750 UHF RFID reader module uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840 to 960MHz.

Different region frequency could be selected by software.

It supports dense reader working mode.

Fixed power is 30dBm.

With standard 8dBi antenna, the reading distance can reach 24 meters, maximum identifying speed can reach 1000/S;

With simple power supply and interface circuit, a high performance RFID system can be established.

It is suitable for logistics, costume, medical industry, and complex assets management, etc.

 

Technical Data

1 Fixed current: 1.8 A

2 Standby current: less than 1mA

3 Frequency range: 840 - 960 MHz, software selected

4 Default working frequency: Frequency hopping

5 Channel bandwidth: less than 250 KHz

6 Frequency hopping speed: less than 2 s

7 Fixed power: 30 dBm

8 Stepping interval: 1~2 dB, (from 5~30dBm, adjustable by software)

9 Label protocol: EPC C1G2/ISO18000-6C

10 Communication protocol: Asynchronous serial ports protocol

11 Starting time less than 50 ms

12 Radio-frequency power rising time: less than 500 µs

13 Radio-frequency power dropping time: less than 500 µs

14 Max reading range: 24 meters with 12 dBi antenna

 

Size and Weight

Size: 65 X 40 X 10 (MM)

Weight: 80 g

 

Characteristics of DC

Minimum Voltage of power: 4.5 V Direct current

Maximum Voltage of Power: 5.5 V Direct Current

Characteristics of DC
Data	Mini value	Typical value	Max value	Unit	Remark
Voltage of power	4.5	5	5.5	V	Direct current
Input high level	2	3.3	5.5	V	GPIO
	2	-	5	V	EN
Input low level	-0.3	0	0.8	V	GPIO
	-	-	0.18	V	EN
Output high level	2.9	-	-	V	GPIO
Output low level	-	0	0.1	V	GPIO
Enable current	2	5	25	uA	VEN more than 2V

 

 

Environment Requirement

1 Working temperature: -25 - +75 C degree

2 Storage temperature: -40 - +85 C degree

3 Relative humidity: 10% - 90% RH

 

PIN definition

PIN definition
Pin	Signal name	Signal direction	Function/compatibility description
1	VCC	Input	Module supplying power
2	VCC	Input	Module supplying power
3	GND	-	Module connecting ground
4	GND	-	Module connecting ground
5	EN	Input	Module enabling, highly effective
6	GPIO	Bidirection	Generic port
7	GPIO	Bidirection	Generic port
8	GPIO	Bidirection	Generic port
9	UART_RX	Input	Asynchronous serial interface receiving
10	UART_TX	Output	Asynchronous serial interface sending
11	DBG_RX	-	Test port
12	DBG_TX	-	Test port

 

If you have further question or request on this product, please feel free to contact us.

 

 

Contact information:

Mr. Jimmy Wang

Sales Manager

Winnix Technologies Co.,Limited

Adds:2/F M-6 Building, Hightech Middle Area, Nanshan,ShenZhen,Guangdong Province,China

Tel: +86-755-86028268 or 86028146   (ext.8652)

Email: jimmy.wang221[at]gmail.com

Website: www.winnix.net

Skype: jimmy.wang221