Jinan North Equipment welding turning rolls / roller rotators are characterized by simple, compact structure, small bulk, light weight and great suitable ability...And this machine can work under various condition, can support the cylindrical or columniform workpiece with weight under 1000kg, diameter of 20mm-700. (NHTR-3000 welding turning roll could work with pipe diameter from 40 to 1500mm). Then its rotation speed is stepless adjustable when the rotation speed is 80-1600 mm/min. Easy to operating and installing, and with the virtue of being practical.

Advantage of Jinan North Equipment welding turning rolls:
1. Since the constant torch, frequency control motor, making the load capacity much bigger, low-speed stability much better.
2. Polyurethane wheel design increases the friction between wheel and work piece, standing the high temperature, fiction better and do not easy to skid.
3. Separation structure is suitable for any length work piece.
4. Two sets drive rolls make it suit the pipe Dia. From 20-700mm automatic, do not need adjust the distance between rolls at all.
5. Adopting the hand control box controls the on/off and forward/reverse of the turning roll. You can also choose the NHFC-10 speed foot pedal, which could control the on/off, but also the rotation speed. Realizing the one key regulation, easy operation.
6. The whole machine adopts the welding design structure, holding the advantage of compact structure and high Rigid, convenient to install and remove, very suitable for the different working place.

Model
NHTR-1000

Input Voltage
AC220/110V, 50/60Hz

Loading capacity
1, 000kgs

Speed Range
80-1600mm/min

Diameter Range
φ 20-700mm

Drive Motor
DC Motor, 220V/110V, 100W

Roller Type
50mm(W)*φ 200mm

Drive Dimension(Including control box)
580*360*350mm

Slave Dimesion
450*120*350mm

Net Weight
54kg