zhongliqi fluorescent sublimation heat transfer ink 

 

Advantages

1. High transfer rate.

2. Excellent color reproduction, gorgeous color, not color cast.

3.No crust in 28-30 days (open the cover),save 20% compared with other ink when printing on machine

4. Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling.

5.Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance.

 

1. Use Principle

It is used on all kinds of offset machine. With the ink,first print image on paper, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric.

 

2. Use Scope

It can be used on all kinds of offset machine. (single-color, two-color and multicolor offset printing machine which supply single paper once)

 

3. Transfer Paper

Coated paper, offset paper, chrome paper and cardboard paper.

 

4. Suitable Fabrics

Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile. (All kinds of synthetic fabrics)

 

5. Colors

Magenta & Yellow

 

6. Use Method

(1)Be able to adapt to the demand for middle-speed or high-speed printing.

(2)During the normal condition, use the ink on the machine directly.

 

7. The printing process just needs 3 steps

(1)Print the image on paper, and normal paper is ok.

(2)Put the printed paper on substrate, such as polyester and nylon fabric.

(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.

 

8. Product Characteristics Product characteristics

* No Crust

a.Granula size is less than 5 micron.

b.No crust in 28-30 days. (open the cover)

 

* Safety

Passed SGS,DGM,MSDS,totally environment-friendly!

 

* Advantage

Good stability on the machine,clear dot reproduction,excellent ink-water balance.

Be able to adapt to the demand for middle-speed or high-speed printing.

During the normal condition, use the ink on the machine directly.

 

*P.S. please make samples before the final printing to confirm the exactly image.

 

9. Transfer temparature

About 185~220°C

 

10. Transfer time

About 20~40 seconds

 

11. Application examples

a.To get 50%C on fabric,the color on paper should be 30%C

b.To make red PS-plate,the ratio is 100%M and 35%-40%Y

c.To make blue PS-plate,the ratio is 100%C and 20%M

d.To make green PS-plate,the ratio is 80%C and 90%Y

e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment

 

12. Please be noted

The control of the colors is always carried out after the transfer of the final supports.

The relationship between the temperature and the time of contact is important in order to have the optimal color resistance and ink penetration (the longer the time of transfer, the better the ink penetration of the fabric).

 

Packing

1kg/tin,12kg/carton.carton inside,wooden outside.