KS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier
Introduction ofKS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier:
1, Enhance mobile phone signal strength;
2, Improve communication quality;
3, Reduce cell phone radiation;
4, Protract cellular battery life;
5, Economic building cost;
6, Easy operation;
7, Easy installation;
8, Build-in power supply;
| Frequency range |
Uplink 1930~1990MHz |
| Downlink 2110~2180MHz |
| Gain ( dB) |
Uplink Gp≥55 |
| Downlink Gp≥60 |
| Export power (Po) |
≥17dBm |
| Pass band ripple |
≤3dB |
| I/O impedance |
50Ω/N connector |
| Noise figure |
≤4dB |
| Transmission Delay |
≤0.5μs |
| Ambient temperature |
-10℃~60℃ |
| Power supply |
AC110~220V 45~55Hz |
| Size |
200 x 130 x 20 mm |
| Reliability |
To the GB6993-86 standard |
| Electromagnetic |
To the ETS300 694-4 standard |
| compatibility |
| Function |
a) Power supply LED denote
b) Export power LED denote |
| coverage area |
200 m2 |
Features of KS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier:
1, High gain, easy installation and operation.
2, Full-duplex, single-port design, build-in power supply.
3, Use ALC technology, adjust extent automatically
4, LED Light Working & Signal Condition Indicators
5, Big linear power, control intermodulation & scatteration stably
6, Dependability stand by GB6993-86 standard
7, Compatibility of electromagnetism according with ETS300 609-4
8, CE and RoHs Approved
Installation Approaches of KS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier:
1. Fix up outdoor antenna reception on housetop and point to signal tower.
2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
4. Plug power adaptor into AC power socket and finish installation.
Technique Supporting of KS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier:
1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
2. If can not call out, please adjust the direction of outdoor antenna.
3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least, with a wall between and not in a same horizontal line.
Accessories Selection of KS-3210 3G 2100MHz mobile phone signal Booster Repeater Amplifier:
Outdoor antenna use 7 units Yagi antenna, indoor antenna use board or rooftop antenna
Package:
- 1 x 3G cellphoneRepeater
- 1 x Power Adapter
- 1 x adapter connector
- 1 x Manual
| CDMA 824-849Mhz/869-894Mhz Mobile phone Signal Repeater |
| 1, Enhance mobile phone signal strength; |
| 2, Improve communication quality; |
| 3, Reduce cell phone radiation; |
| 4, Protract cellular battery life; |
| 5, Economic building cost; |
| 6, Easy operation; |
| 7, Easy installation; |
| 8, Build-in power supply; |
| |
|
|
|
| Technical specification |
| Frequency range |
Uplink 824~849MHz |
| Downlink869~894MHz |
| Gain ( dB) |
Uplink Gp≥60 |
| Downlink Gp≥65 |
| Export power (Po) |
≥27dBm |
| Pass band ripple |
≤3dB |
| I/O impedance |
50Ω/N connector |
| Noise figure |
≤4dB |
| Transmission Delay |
≤0.5μs |
| Ambient temperature |
-10℃~60℃ |
| Power supply |
AC110~220V 45~55Hz |
| Size |
220 x 140 x 40 mm |
| Reliability |
To the GB6993-86 standard |
| Electromagnetic compatibility |
To the ETS300 694-4 standard |
| Function |
a) Power supply LED denote
b) Export power LED denote |
| coverage area |
2000 m2 |
| |
|
|
|
| Features |
| 1, High gain, easy installation and operation. |
| 2, Full-duplex, single-port design, build-in power supply. |
| 3, Use ALC technology, adjust extent automatically |
| 4, LED Light Working & Signal Condition Indicators |
| 5, Big linear power, control intermodulation & scatteration stably |
| 6, Dependability stand by GB6993-86 standard |
| 7, Compatibility of electromagnetism according with ETS300 609-4 |
| 8, CE and RoHs Approved |
| |
|
|
|
| Installation Approaches |
| 1, Fix up outdoor antenna reception on housetop and point to signal tower. |
| 2, Connect outdoor antenna to “outdoor” port in repeater machine through cable. |
| 3, Connect indoor antenna(s) to “indoor” port in repeater machine through cable also. |
| 4, Plug power adaptor into AC power socket and finish installation. |
Kaw Electronics Co., Ltd
Contact person: Joan Liu(sales representative)
TEL: 86-755-86640950
Email:booster@kawelec.com
Web: www.signalbooster.cc
Add: HaiDe Mansion, Nanxin Road, Nanshan District, Shenzhen,China.518052
