HDMI fiber extender 25 km HDMI optical transceiver
| Model: | DT100SF |
|---|---|
| Brand: | PWAY |
| Origin: | Made In China |
| Category: | Construction & Decoration / Building Establishment |
| Label: | HDMI optical fiber t , HDMI fiber extender , HDMI optical transce |
| Price: |
US $360
/ pc
|
| Min. Order: | 2 pc |
Product Description
DT100F
HDMI Fiber Optic Transmission
1.0 Introduction
2.0 Panel Description
3.0 Function Specification
4.0 Connection and operation
DT100F is a perfect solution for transmitting HDMI audio and video through the fiber, the set of device includes a sender of DT100FT and a receiver of DT100FR. Our products transmit the HD video through gigabits of optical fiber, which making the images clearer as well as the transmission more stable. Also, it can transmit gigabits of Ethernet data while transmitting the HD videos, At the same time, the product has the built-in IR remote control function.
2.0 Panel Description
2.1 Front Panel
|
|
HDMI TX
|
HDMI RX
|
|
HDMI PORT
|
Video Input
|
Video Output
|
|
IR PORT
|
IR Input
|
IR Output
|
|
RJ45
|
Network Data Transmission
|
|
|
Fiber Port SC
|
Optic-fiber Data Transmission
|
|
|
RESET KEY
|
Hold down the key for 8 seconds after power on, the model will restore default settings
|
|
2.2 Back Panel
Attention：To ensure your safety, please use the our original power cords, and connect to the secure socketcorrectly.
2.3 Indicator led.
|
Indicator led
|
Status
|
|
|
Power
|
Light On
|
The power of the device
|
|
Light On
|
||
|
Flash
|
The video device connected successfully
|
|
|
Light On
|
Network Link up
|
|
|
Flash
|
Packets of data are transmitting in the indicating port
|
|
|
1000M
|
Light On
|
|
|
Light Off
|
In the state of 10M or 100M
|
|
|
Dpx
|
Light On
|
In the State of full-duplex
|
|
Light Off
|
In the State of half-duplex
|
|
3.0 Function Specification
> HDMI 1.3/HDCP1.1 & 1.2
> Both Optic-fiber transmission and Ethernet Transmission
> Support point-to-point mode, one point-to-many mode and cascaded transmission mode.
> Standard and International 802.3Z gigabit Ethernet standard.
> built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control.
> Pure hardware design, just plug and play, no need to install extra software.
|
Video Parameter
|
|
|
Video Resolution
|
640X480 @ 60fps 800X600 @ 60fps
|
|
1024X600 @ 60fps 1024X768 @ 60fps
|
|
|
1152X864 @ 60fps 1280X600 @ 60fps
|
|
|
1280X720@ 60fps 1280X768@ 60fps
|
|
|
1280X800@ 60fps 1280X960@ 60fps
|
|
|
1280X1024@ 60fps 1440X1050@ 60fps
|
|
|
1440x900 @ 60fps 1600x900 @ 60fps
|
|
|
1660x1200 @ 60fps 1680x1050 @ 60fps
|
|
|
1920x1080 @ 60fps 1920 x1200 @ 60fps
|
|
|
Audio
|
32kHz, 44.1kHz and 48kHz
|
|
Infrared Support
|
38KHz; NEC code
|
|
HDMI Version
|
HDMI 1.3
|
|
HDCP Version
|
HDCP 1.2
|
|
Other Parameters
|
|
|
Power input
|
AC input: 100V - 240V (50 - 60Hz)
|
|
Max Power Consumption
|
|
|
DT100FR: 5W
|
|
|
Size (L-W-H)
|
210×140×30 mm
|
|
Net Weight
|
785g*2pcs
|
|
0℃ - 70℃ / 10% - 80%RH(no condensation)
|
|
|
Storage Temperature/Humidity
|
-10℃ - 80℃/ 5% -90% RH(no condensation)
|
Fiber Parameter
|
Product Model
|
Max
Distance |
Fiber type
|
Optical
Interface |
Wave
Length |
Optical
Power |
Receiving
Sensitivity |
Link Budget
|
|
DT100F-S3
|
3KM
|
single
mode |
SC
|
1310nm
|
-9~-3dBm
|
-26dBm
|
-17dBm
|
|
1510nm
|
-9~-3dBm
|
-26dBm
|
-17dBm
|
||||
|
DT100F-S20
|
20KM
|
single
mode |
SC
|
1310nm
|
-9~-3dBm
|
-26dBm
|
-17dBm
|
|
1510nm
|
-9~-3dBm
|
-26dBm
|
-17dBm
|
||||
|
DT100F-S40
|
40KM
|
single
mode |
SC
|
1310nm
|
-9~-3dBm
|
-26dBm
|
-17dBm
|
|
1510nm
|
-3~+2dBm
|
-26dBm
|
-23dBm
|
||||
|
DT100F-S80
|
80KM
|
single
mode |
SC
|
1490nm
|
-3~+2dBm
|
-26dBm
|
-23dBm
|
|
1510nm
|
>0dBm
|
-26dBm
|
-26dBm
|
4.0Connection and operation
1. Please connect the HDMI signal source to the DT100FT。
2. Connect DT100FR to the HD displayer.
3. Between DT100FT and DT100FR (SC port-to-SC port) use optical fiber to connect.
4. if you want to transmit network data while transmitting the videos, please connect the RJ45 port , this port support gigabit transmit.
5. IR remote control function, connect the IR receiver to the HDMI TX and connect the IR transmitter to the HDMI RX.
6. Power on the device, POWER light on, then it will do the self-checking job with the other indictors blinking automatically. When the STATUS light on or flash, the device starts up.
| Payment Terms: | TT |
|---|---|
Member Information
| Shenzhen pinwei technology Co., LTD | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Manufacturer |
| Phone: | 13903025160 |
| Contact: | adalee (manager) |
| Last Online: | 14 Mar, 2016 |