Latest five element (Na, K, Li, Ca, Ba) 

Single channel Flame Photometer

Ergonomic design with front loading, 
unobstructed sample work area, 
with removable tray for easy cleaningSafety features including fail safe flame detection and shut off, with low air pressure indicator

High sensitivity with fine manual control of air, and stable flame design

And ease of maintenance and storage 
Separate pneumatic and electronic pods 
Small footprint (20 x 30cm) 
Easy to remove and clean filter stick

 

SPECIFICATION

Model 360 Industrial Flame Photometer, Part Number 360 00 009

OPERATING CONDITIONS

Temperature		+10°C to +35°C
Humidity		85% Max. @+35°C

OPERATING RANGE

Sodium is highly prone to self-absorbance in the flame above a concentration of 10 ppm.

 

SPECIFICITY

Na, K & Li Interference is <0.5% value of element under analysis.

REPRODUCIBILITY

<1.5%* CV for 10ppm K set to 1000. (20 aliquots sampled for 20 seconds each from a single sample) Reading taken 20 seconds after introduction and with a Blank aspirated for 10 seconds between each standard reading. 
<1.0%* CV for 20 consecutive readings taken at 20 second intervals without removing the uptake tube from a 10ppm Potassium solution Set to 1000. 
(*may not be achievable if fuel gas used is Natural gas)

ASPIRATION RATE

3-6 ml/min

SPEED OF ANALYSIS

Time to stability 20 seconds

DATA OUTPUT

Analogue: Voltage 0.20 Volts FSD

PACKING DETAILS

(h x w x d) 
500 mm x 300 mm x 230 mm 5.6 Kg Nett 
480 mm x 420 mm x 350 mm 8.6 Kg Packed

DELIVERED WITH

PSU Multi Plug Adapter 12Vdc 1 Nebuliser cleaning wire, 170mm 1 pack of 3 Nylon reinforced hose 2m Solution, 1000ppm Sodium Std. 1 x 100ml Hose - gas 6.3 mm i/d 2m Solution, 1000ppm Potassium Std. 1 x 100ml Tubing clip 4 Solution, 1000ppm Calcium Std. 1 x 100ml Tube, Drain 1m Solution, 1000ppm Lithium Std. 1 x 100ml Atomiser St.St. complete 1 Solution, 1000ppm Barium Std. 1 x 100ml Nebuliser inlet tubing 150mm 1 Manual, operator 1

 For more watch video-  www.youtube.com/watch?v=0KRXfwS9nDg