Metal mold release agent

Metal mold release agent
Model:-
Brand:I75L
Origin:Made In China
Category:Chemicals / Fine Chemicals
Label:moldrelease agent , metal mold , kwc/imr casting
Price: ¥30 / KG
Min. Order:200 KG
Inquire Now

Product Description

75L Mold-release agent: The formulation of this product was fixed after 75 trials.
 
 
Introduction of I-75L:
 
 
Specification
Graphite I75L is a powder made on the basis of graphite and other carbon and mineral materials.
Application
Graphite I75L is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. Suitable for heated metal molds.
Treatment
Graphite I75L is mixed in distilled water or deionization water in the proportion of 1:10 and is at once ready for use.
The proportion can be changed according to the weight and thickness of the sides.
Graphite MS can in special cases be added to graphite I75L. Thus the covering power and sliding ability can be improved.
Clean the die before using I75L; use cotton cloth, brush, spray gun, etc to smear or spray the mixed I75L on the die.
Heat the mold to at least 120 before using I75L.
It is recommendable to keep the whole liquid in motion by appropriate device (stirring apparatus).
Bearing application
In dry rooms graphite I-75L is indefinitely imperishable.
Effect
Longer durability of the die, uniform surface of the castings, less subsequent after-work of the casting.
Metal mold release agent  1

Member Information

Qingdao Miller & Englehardt Co., Ltd.
Country/Region:Shan Dong - China
Business Nature:Manufacturer
Phone:80821271
Contact:Tina Lu (Sales manager )
Last Online:11 Jan, 2013