Are you looking for a intrinsically safe and explosion proof lamp? then check following data of KL1.2Ex:

This LED Cap Lamp is ATEX approved (Ex ia I M1), can be used in mines with explosive atmospheres and occurrence of combustible dust.

Current-limiting resistance, quick-melting fuse, over current and overheat protective device built in headpiece make lamp work safely.

Lamp body adopts ABS, 1 main light for working, 4 auxiliary lights for emergency lighting, only 200g.

We offer different charging devices for one, ten and eighty units: KZC1B, KZC10A, KZC80A.

Specification
Power supply:                                            Li-ion battery, 3.7V,1.4Ah
Charging time:                                           <8 hours
Charging output:                                        (6~8)V
Working temperature:                                 (0~60)°C
Protection grade:                                        IP65
Battery life:                                                  >500 cycles
Weight:                                                        200g
Main light lighting time:                                >15 hours
Illuminance:                                                  >2300Lux
Auxiliary light(emergency) lighting time:       >50 hours

Standard

The miner’s cap lamp complies with the following Standards:

-EN 60079-0: 2012

-EN 60079-11: 2012

-EN 62013-1:2011 

-EN 50303:2000