Electronic multi shots inclinometer mainly is used in the scope of measuring the attitude parameters of petroleum well engineering and measuring the bending of geological drilling. When working down a well, according to the preset working mode the primary measurement data are stored in the memories installed in probe. When the instrument returns to the surface, computers and other surface instruments will retrieve the data stored in memories and calculate inclination, azimuth, tool face, temperature and so on as required by drilling. Data processing, plotting and printing can be completed further. By using the same probe tube, the inclination, azimuth and tool face of a certain point can be measured, as well as the inclination and azimuth of multi points of a certain well section.
Features:
1. Single shot and multishot integrated
2. Titanium alloy surface
3. Software-processed output and 3D displayer.
4. Internal atemperator, durable in high-temperature
5. Circumstance
6. Maximum 3600 measuring spots in memory.
Technical Parameter |
Inclination |
0°to180° ±0.2° |
Azimuth |
0°to360° ±1.0° (For inclination≥10°) |
Tools face |
0°to360° ±1.0° |
Max. Temp. |
105ºC |
OD |
30 to 45mm |
Impact resistance |
2000g, 0.5ms |
Shock resistance |
10g,20to100Hz |
Uninterrupted operating period |
≥12h |
Range of delay |
1to1000 min |
Min time interval |
1 min |
Time interval |
15to1000s |
TYE-MR Electronic Multi Shots Inclinometer |