Detailed information of CNG cylinder manufactured by Zhongyou Tongyong Luxi Natural Gas Equipment Co.,Ltd.:

ISO11439 CNG cylinder, made of quality steel tubes,

Working pressure/ Testing pressure:200bar/300bar;

OD279MM, 325MM, 356MM, 406MM etc,

Water capacity: 50L to 200L;

CNG cylinder type 1, is all steel cylinder, no covering other than painting on the shell. It’s cost effective but heavier than other CNG cylinders;

CNG cylinder type 2, steel liner reinforced with glass fiber partially around the cylinder (hoop wrapped ). Lighter weight but no less stronger structure. The steel liner and the glass fiber bare half of the pressure.

 Jumbo CNG cylinder for CNG trucks, CNG trailer, CNG station etc. (4130 X seamless steel pipe made)

Large capacity enable long distance transportation, easy to install and dismantle, high reliable performance. Jumbo CNG cylinder cascade container can be mounted on trailers to transport CNG from gas well to gas reserve station, especially fit for the place where CNG pipeline network hasn’t been built.

Specification of Jumbo CNG cylinder:

OD559mm,

Standard: ISO11439:2000; ISO approved, Gost approved, BV approved;

OD(mm): OD559

Water capacity: 920L, 1130L, 2000L, 2050L, 2200L, 2210L, 2250L

Cylinder length: from 5224mm--10960mm.

Material: 4130x

Design thickness(mm): 16.8mm, 17.4mm, 20.7mm

Working pressure:20Mpa, 25Mpa

Testing pressure (time): 30Mpa (60S)

OD610mm;

Standard: ISO11120-2009; ISO approved, Gost approved, BV approved;

OD(mm):OD610

Water capacity: 520L, 440L, 470L

Cylinder length: from 2120mm--2428mm

Material: 4130x

Design thickness(mm): 15mm

Working pressure:16.6Mpa

Testing pressure: 24.9Mpa

  CNG cylinders play an important role in CNG conversion:

CNG(compressed natural gas) as an alternative fuel is widely accepted these days due to its features of friendly to environment and low cost. Accordingly, the popularity of natural gas based vehicles is increasing, more and more vehicles that powered by diesel, gasoline etc are converted to natural gas.

Usually conversion kits include: valves, regulators, sensors, injector nozzles, venting hoses, fuel selector switch, filter, pipes, etc. CNG cylinder is also an essential equipments in CNG conversion, usually installed in the rear part of cars which is the safest part.

Quality:

CNG cylinder is a kind of high pressure vessle (200bar) installed on cars that powered by natural gas and served as special spare parts, so safety issue is what we pay special attention. All of our CNG cylinders are manufactured in compliance with ISO11439, ISO9809, ISO11120 and inspected all through the production. We have BV certificate for nearly all of the specifications.

Corporation:

Zhongyou Tongyong Luxi Natural Gas Equipment Co.,Ltd is one of the largest CNG cylinder manufacturer founded in 2008. We are a professional manufacturer of pressure vessels, a joint venture between Sinogas General Group (public listed company) & Luxi Chemical Co., Ltd (public listed company). We value our reputation, pay special attention to the quality of CNG cylinders and adopt flexible management and operation system.Corporation occupys more than 200,000 square meters. There are more than 200 workers including 30 technicians. Corporation has passed ISO9000 AND BV inspection.