Independent Head Machine |
Features |
Many mahine heads can process at the same time, can aslo be used alone,many times increasing in efficiency. |
Can aslo control the machine heads Independently, can use only one head to process and make increasing the workig area. |
Adopt German double-nut ballscrews, imported square guide rail, the adoption of the breakpoint memory,Guarantee in the accident(power off) or the next day can process. |
Gantry movment, long time use no distortion, the more precise positioning accuracy. |
Large cutting power not only to elaboratey carved a jagged, smooth clear bottomm |
Increase the efficiency when doing the complicated graph; good coherence and high quality when batch processing; good stability with the long time workig and low error ratiom. |
Well compatibility in software: all kind of 3D and JD caving software. |
Can make the quantity of the heads and the working area for the machine as per customer’s request. |
Model |
HD-1825 |
|
|
Optional |
X Y working area |
1800×2500mm |
1300/1500/1800/2500mm |
Z working area |
200mm |
|
Table size |
1950×3000mm |
|
Max feeding |
>25m/min |
|
Work-holding |
by suction |
|
Interface |
USB |
|
Command |
G code*.u00*.mmg*.plt |
|
Surroundings for software |
Windows98/2000/XP |
|
Power(not include the spindle) |
2.0KW |
|
Power |
AC220V/380V/50Hz |
|
Main axle power rate |
2×3.5KW (Air-cooled) |
1.5KW/3.0KW(Water-cooled) |
Main axle rotating speed |
0-18000rpm/min |
|
Work Mode |
Stepper |
Servo |