|Origin:||Made In China|
|Category:||Consumer Electronics & Lighting / Lighting / Torch & Flashlight|
|Label:||diving light , dive torch , diving flashlight|
|Min. Order:||5 pc|
Archon V10P Diving Light Operating Instructions
Model No.：V10P Diving Light
Bulb：CREE White LED(CCT 6500K)
Max brightness level：1400 lumens
Runtime：high 120min，low 360min，SOS 300min
Output levels：high> low> SOS
Reflector：glossy aluminum reflector
Lens：4mm toughened glass
Body material：durable aluminum
Angle of light beam: 16°
Surface treatment：premium anodizing
With battery over-discharging protection，polarity reversing protection
Operation voltage：4.2V to 2.8V
Waterproof：up to 100 Meters
Dimensions：148mm(length)*31mm(dia. of light head)*29mm(dia. Of light body)
Weight in air：approx.280g.(without battery) ；approx.400g.(with battery)
Weight in water：approx.210g.(with battery)
The ring-shaped power indicator surrounding the switch lights up in green，or yellow，or red，
when power capacity is above 75%，or between 75-30%，or between 30-10%.It flashes in red for power capacity between 10-5%，and switches off automatically when the power capacity is
below 5%to prevent over-discharging battery
1.Hold the light body with light head pointing upward，unscrew the head.
2.Remove used battery and replace with fresh one per polarity signs.
3.Screw light head down. Do not over tighten to break the O-ring.
Successively press the button switch to cycle through high，low，SOS，and off. And the user
may also turn it off at any light mode by long pressing the button switch for three seconds.
1.Please read this operating instruction carefully before the first use. Please never attempt to repair or modify the light yourself
2.Please handle illuminants with care to avoid breakage. While being hit on，illuminants can break or splinter. Splinters can cause eye and skin injuries
3.Please check the light regularly for sharp edges，scratches or damages to the surface or O-ring，as this can cause the light to flood under pressure. PLEASE LUBRICATE THE O-RING，AND REPLACE IT TIMELY.(Please avoid applying lubricant to circuit board or battery compartment cross section，which may affect the conduction.)
4.Please rinse the product surface thoroughly after each use，and allow sufficient time for it to dry both inside and outside before storage.
5.Please remove the battery from battery compartment for transport or storage.Do not lay the
battery in a fire or expose it to direct heat. Do not wet or hit the battery. Please charge it after
each use，or once every three months，to avoid over-discharging
6.Please never leave the light unattended when it is on
7.Please keep the device out of the reach of children or pets.
8.Please never shine the light to human or pet's eye.
9.It is recommended to use ARCHON battery with re/discharge protection circuit or BMS(Battery Management System) for this light.
10.In case of accidental flooding，please remove the battery，and dry the light and battery compartment as soon as possible，to prevent the secondary damage.
|Xiware Technologies Co.,Ltd|
|Country/Region:||Guang Dong - China|
|Contact:||jack (sales manager)|
|Last Online:||18 Aug, 2021|