ELM327 USB V1.4/V1.5

The adapter allows the diagnosis of most European cars have the OBD II standard, which makes it versatile tester.Posredstvom CAN protocol is the diagnosis of the newer cars (from 2003 year).

Works with: 
- U.S. gasoline by 1996. 
- European gasoline by 2001. 
- Diesel from 2004.

The presence of 16-pin connector does not mean the car keeps OBD-II protocol. For example, will not work with any VW-Passat for Europe 1998, nor c SUBARU Impreza 1999.Europe, due to the absence of the protocol OBD-II on these cars despite the jack.

But will work with SUBARU Legacy 1997 for the U.S. market, as American OBD-II protocol is supported by all cars after 1996. In Europe, the OBD-II protocol is implemented inall cars after 2001

Supports all OBDII protocols:

• J1850 PWM (41.6 kbaud) 
  
• J1850 VPW (10.4 kbaud) 
  
• ISO 9141-2 (5 baud init, 10.4 kbaud) 
  
• ISO KWP (5 baud init, 10.4 kbaud) 
  
• ISO KWP (fast init, 10.4 kbaud) 
  
• ISO CAN (11 bit ID, 500 kbaud) 
  
• ISO CAN (29 bit ID, 500 kbaud) 
  
• ISO CAN (11 bit ID, 250 kbaud) 
  
• ISO CAN (29 bit ID, 250 kbaud)

Capabilities of the adapter:

• Reading the fault codes and their descriptions. Review the minimum, maximum and current values. 
  
• Deleting fault codes from the memory controller 
  
• Real-time monitoring of sensor readings - live data. 
  
• Measurement of acceleration, fuel and more. similar parameters 
  
• and many other features.

It is possible to use with all software designed for ELM327. 
Many manufacturers offer free and / or paid software for use with this interface for Windows, Linux, PDA and others. For example: Digimoto, EasyOBDII, MoDiag.professional, PCMScan, Proscan, ScanMaster-ELM, ScanTool, ScanXL_ELM, Vauxcheck, VitalScan and others.

ScanMasterELM allows read / delete errors in the ECU of Opel 1996-2004 (protocol KWP2000) and Alfa Romeo with ECU - M1.5.5, ME2.1, ME3.1 and ME7.3.1 and score. box Selespeed. Other software also allow you to work with controllers outside the OBD-2 standard.

Fiat / Alfa / Lancia cars: 
The interface can be used for the diagnosis of these vehicles by FiatECUScan . 
Table of supported controllers / interfaces. Interface Language - AN, English and more.

 

Specification

• PC connection: USB 
  
• Transfer rate: 9600 or 38400 
  
• Indication LEDs: OBD Tx / Rx, USB Tx / Rx, Power 
  
• Power supply: 12V, internal protection / short circuit and overload in 
  
• Power consumption: 45 mA 

Welcome to order and do wholesale . 
Skype online :autodiagtech-jenny