Dissolution testing is one of the most important tests on tablets, capsules, pellets and other solid dosage forms, and has been widely carried out by the pharmaceutical industries for the quality control and R&D of pharmaceuticals. ZRS-8G Dissolution Tester offers six shaft-positions and twelve vessel-positions. Six of the twelve vessels correspond to the six shafts in one line directly in front of the user. This means easy access and accurate sample probe positioning for the user. Six additional vessels not only may be used for holding the reference standard and/or blank media during a test run, but also may be used for the close next test-run with time-saving. The tester head at the top can be manually lifted up for easily changing the paddles and vessels. The microprocessor-based tester allows the temperature, rotation speed, and sampling intervals etc. to be predetermined and stored. Testing will automatically proceed based on the predetermined test parameters. However, during testing process, test parameters input is allowed without any interruptions to the proceeding testing. Temperature and the rotation speed are displayed on the LED displays in real time. ???? ?The flow-through heating-circulator system not only has the water bath warmed up rapidly and evenly, but also provides precise temperature control.

Features
1. 6 basket poles or 6 paddles.
2. 185mm high 8 new vessels can be placed
3. User-friendly interface, easy to operate
4. All operating parameters can be presetted and automatically stored for ease of the next boot without duplication
5. The use of a SPWM motor ensures precise speed of rotation, smooth driving, low power consumption
6. Constant temperature water bath adopt built-in digital temperature meter and the new software and hardware temperature monitoring and control methods. Small drift of temperature, rapid warming, high precision, temperature deviation can be easily calibrated
7. The timer has three modes to be choosed
8. With selff-checking procedure and automatic protection function will make alarm signal and self-protection when failure occurs
9. Manufacturing paddle, basket pole, turn basket with high quality stainless steel

Specifications
1. Number of shafts: 6
2. Number of vessels: up to 12
3. Wobble of Paddle: ≤0.5mm
4. Wobble of basket: ≤1mm
5. Coaxiality of Shaft and Vessel: ≤2.0 mm
6. Speed Control Range: 25～250 rpm
7. Rate Resolution: 1rpm
8. Speed Stabilization Accuracy: ≤±4%
9. Temperature Control Range: (Room temperature) 5℃～45℃
10.Temperature Resolution: 0.1℃
11. Temperature Control Accuracy: ≤±0.3℃
12. Operating time counting: up to 99 hours 59 minutes.
13. Number of sampling intervals: maximum 9 different sampling periods
14. Sampling Interval: 0 to 9 hours 59 minutes per period, count down
15. Length of start timing: maximum 99 hours 59 minutes, count down
16. Length of stop timing: maximum 99 hours 59 minutes, count down
17. Power requirement: 220VAC±10%, 50Hz, 5A
18. Environment requirements: temperature 5-37℃; humidity ≤80%
19. Operating noise: <60 dB
20. Dimension: 1000×460×430 mm
21. Weight: 80 kg