The machine could auto wash, fill, cap, bottles are transferred on the conveyer .

when bottles come to the core machine, washing part(washing 18 Piece once),filling part(filling 18 pcs once),capping part(capping 6 pcs once)work. at the same time, cap panel feed cap into the capping part.

 our 3 in 1 bottle water washing filling sealing machine series is very wide, the production capacity range: 1500—12000 bottles per hour.

Model：(heads of rising, filling, capping)18-18-6

Capacity BPH: 4000B/H( basis on the 500ml bottle)

Suitable bottle standard (for bottle 250-2000ml): Diameter 50-110 mm; Height :170-310mm

Filling Precision: ±10mm（liquid level）

Suitable cap shape: Plastic screw cap 

 

1 The bottle-necks are cramped and bottles are suspended during the operation process. This avoids many malfunctions caused by thinner bottle body or different highness of bottles. This design also reduce dramatically the required number of changeable parts, make it more convenient and quickly to change to another type of bottles.

2 The most advanced technology from Japan and Germany is employed in the design. The gravity fixed liquid surface filling is used. The filling is fast, the amount of liquid is accurately controlled and the dropping and leakage are avoided.

3 Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180* along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.

4 The magnetic torque is used for screw capping. The power of screw capping can be adjusted without steps. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.

5 Horizon swirl air power caps sorting device is used to avoid damaging the surface of caps, and when there is a shortage of caps in the caps storage tank, an alarm signal will be generated and the caps will be fed automatically.

6 The whole machine is controlled by PLC .The amount of the drinks in the storage tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle. When bottles are cramped wrongly or when caps are not available, the machine can be stopped automatically.

7 The frequency changing technology is used to adjust the operation speed steplessly. The production capacity can be displayed digitally and can be adjusted conveniently.

8 The frame is made of high quality stainless steel SS304.The critical electronic components are from Mitsubishi, Omron, etc., the pneumatic devices are also from international famous brand.