DESCRIPTION

TufCote CT 200 is based on solvent free epoxy resins, modified with coal tar. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. TufCote CT 200 is applied as two coats application. It is generally applied at a wet film thickness of 200 microns per coat, but can be applied at greater thickness to suit exposure conditions.

 

Uses

Provide chemical and abrasion resistance to prevent corrosion of concrete surfaces for application such as

1. Sea water tanks, channels and intakes

2. Manhole linings

3. Sewage works and effluent plants

4. Chemical processing

5. Foundation waterproofing

6. Jetties, piers and docks

7. Pipe Coating

 

Advantages

1. Excellent Chemical and abrasion resistance.

2. Low cost service life.

3. Does not support bacterial growth.

4. Acts as an impermeable waterproof coating.

5. No primer required.

6. Can be applied to green concrete by brush, roller or spray.

 

Specification Compliance

ASTMD 543

BS1881 Part 207

BSEN12390 Part8:2000

 

Physical & Mechanical Properties

Color of Part A: Clear liquid

Color of Part B: Black Viscous Liquid

Mixed Density: 1.35 gm/cc

Bond Strength: 3 N/mm2

Water permeability: Nil

Pot Life: 75 mins

Tack Free Time: 3 hours

Over Coating Time: 6 hours

Complete Cure: 7 hours

 

Packaging

20 litre pack