Different material of wire mesh demister in different application environments

Stainless steel wire mesh demister has been widely used in various types of tower equipment such as: drying tower, vacuum tower, absorption tower, separating tank, a gas separator, compression absorption tank, evaporator, washing tower, distillation tower, a dust collecting device for recycling containers, etc..

Nickel wire mesh demister to alkali corrosion, whether in high or molten alkali are relatively stable, so it is mainly used in soda industry.At room temperature, nickel in water and salt solution and organic medium (such as fatty acids, phenols, alcohols) is extremely stable.

Titanium wire mesh demister corrosion resistance is very good, especially in the various concentrations of nitric acid, organic acid, chloride, wet chlorine and alkali has strong corrosion resistance.

Polypropylene mesh demister density, strength, stiffness, hardness and heat resistance are better than that of low pressure polyethylene, can be at the temperature of 100 degrees Celsius in the long-term use.Has good corrosion resistance, resistance to most organic and inorganic acid, alkali, salt and organic solvent corrosion.

Teflon mesh demister is one of the world's corrosion resistance properties of optimal deentrainment products, it can be in any type of chemical medium and long-term use, Teflon wire mesh demister hydrofluoric acid, phosphoric acid, sulfuric acid resistant, nitric acid, hydrochloric acid and various organic acids, organic solvents, strong oxidizing agents and various other strong corrosive chemical medium corrosion, even the most powerful Aqua (concentrated sulfuric acid and nitric acid mixtures) it to feel helpless, PTFE mesh demister in -150 ～ + 250 ℃ temperature in normal use, it is other plastic wire mesh demister products do not.

Monel wire mesh demister Monel 400 alloy (UNSN04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a kind of in seawater, chemical solvent, ammonia, hydrogen chloride, sulfur and chlorine in various acidic media such as sulfuric acid, hydrochloric acid, hydrofluoric acid, phosphoric acid, organic acid, alkaline medium, salt and molten salt has good corrosion resistance nickel base alloy.

PP mesh demister mainly by the PP screen, PP screen mesh grids block and the fixed block support device, the wire mesh demister can not only filter the suspended in a gas in a larger liquid foam, and can filter out small and tiny liquid foam, widely used in chemical, petroleum, tower manufacturing, pressure vessels industry in the gas-liquid separation device, PP polypropylene mesh mist eliminator of acid and alkali resistance performance is good, but the working temperature below 100 degrees Celsius, and the cost is stainless steel wire mesh demister is lower.

Other wire mesh demister due to space constraints in the one one list, welcome to valor Hebei Pioneer Metals Corporation 0318-5283817 15369920152 custom processing wire mesh demister