Monel 400 wire mesh demister: Monel 400 alloy for high strength single-phase solid solution, it is one of the largest amount, the most extensive use, comprehensive performance excellent corrosion resistant alloy.This alloy in hydrofluoric acid and fluoride in steam medium has excellent corrosion resistance, the hot concentrated alkali solution has excellent corrosion resistance.At the same time also resistant to neutral solution, water, water, steam, organic compounds, corrosion.The alloy is one of the most important characters are not generally produced by stress corrosion cracking, good cutting performance.

Monel wire mesh demister chemical composition:

Ni: allowance; Cu:28-34; Si: < 0.5; Mn: < 2; C: < 0.30; Fe: < 2

Monel wire mesh demister corrosion resistance:

The alloy in hydrochloric acid, sulfuric acid, steam, fluoride hydrofluoric acid and their derivatives having excellent corrosion resistance.At the same time in the water than the copper base alloy with corrosion resistance.Acid medium: M400 at concentrations less than 85% sulfuric acid are corrosion resistant.M400 is durable hydrofluoric acid in a few important materials of.Water corrosion: M400 alloy in most water corrosion condition, not only corrosion resistance is excellent, and pitting corrosion, stress corrosion are rarely found, corrosion rate is less than 0.25mm/a.: M400 in the air of high temperature corrosion in continuous work of the highest temperature is usually around 600 ℃, the high temperature steam, the corrosion rate of ammonia: due to less than 0.026mm/a. Monel 400 alloy high nickel content, it is resistant to 585 ℃ and anhydrous ammonia ammonification condition corrosion