Silicone rubber for sex dolls

Specifications

Medical grade, no harm to human

Translucent/skin tone and any other colors

Make body organs, such as hands, feet, breast, masks etc.

 

Silicone Dolls Raw Material Main applications

Silicone Dolls Raw Material , it is mainly used to make soft silicone products ,such as sex toys, silicone dolls, love dolls, silicone mask, body organs, body breast enhancers, shoulder pads, paster, trackion ,etc.

 

Silicone Dolls Raw Material Features:

 

Silicone Dolls Raw Material can be used for a long period and maintain softness and elasticity within a temperature range of -65°C ~ 200°C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic,odourless, low linear shrinkage, easy operation, etc.

 

Silicone Dolls Raw Material Performance:

Medical Grade Silicone for Body Organs ,It has good electrical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tasterlessness, aging-resistance, easy pouring, easy operation, and completely vulcanization. It can meet requirement of the Mechanical strength even under a very low hardness. When making printing pads, it will be with low shrinkage and can keep its initial hardness as original after a long time using. So it is the specially suitable material for life-casting.

 

Model	Compopund	BEFORE CURING			AFTER CURING
		Appearance	A Viscosity cP(25°C)	B   hardness (shore A)		C Pot life min(25°C)	D  initial curing (h)	Tensil- strength (Mpa)	Tear- strength (kN/m)	Elongation (%)
Y808	A B A+B 1:1	Yellowish-translucent fluid	4000±1000 4000±1000 4000±1000	A+B  (1:1) 8±2		A+B (1:1) 30±10 Or on request	A+B(1:1) 4±1 Or on request	≥2.0	≥15	≥500

Silicone Dolls Raw Material Technical Datasheets 

 

Silicone Dolls Raw Material Using instructions:

 

Mix component A and component B evenly according to the mixing proportion of 1:0.95-1.05, and can be poured after deaired the bubbles. The operating time (0.5-3) hrs  depends on the temperature; the curing time is 12-24 hrs at the room temperature; and the curing time can be reduced to 10 minutes with the temperature increased to 80~120°C. The operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 1 hour. The product can be produced in red, yellow, etc. according to the  customer's requirements. 

 

Silicone Dolls Raw Material Packaging, storage and transportation

 

1. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .

2. Please keep the material in a cool and dry place. Specially note that the silicone should not touch or mix with compounds including nitrogen, phosphorus, sulfur, tin, lead or metal organic acid. Otherwise, the catalyst will be poisoned, then the silicone can not be cured or just particially cured. For specific precautions, please refer to the instructions in Electronic Potting Silicone part.
3. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.

 

 Silicone Dolls Raw Material Precautions:

 

Silicone Dolls Raw Material is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch  those substances during using.

 

Any problems about Silicone Dolls Raw Material, pls feel free to contact Ms Kaimi.

Mobile:86-18938867528

msn: newstarv(at)hotmail(dot)com

skype:hyjiangying