Metallization Ceramic Tube  

 

metallized ceramic insulator tube
1.electrical ceramic insulator tube
2.vacuum ceramic insulation tube
3.we have our own factory,we are the manufacturer
4.Special type accept OEM

 

Alumina Metallized Ceramic Tube/ Industrial Ceramic Pipe

 

1.Main alumina content:75%,96%,99%,99.8%

2.Good Bending strength,Wear & Corrosion Resistant

3.Design and make strictly according to the customers' requirments

 

 

 

Introduction:

 

    The ceramic materials used offer many important properties, including, low dielectric loss, consistent dielectric constant, high mechanical strength and nil porosity. Our ability to metallise and braze to produce sub-assemblies, allows our customers to concentrate on their core competencies.

 

 

Applications:

 

Vacuum ceramic tube
Vacuum interrupter
Vacuum relay
Vacuum capacitor
Diodes
Thyristor
Gate turn-off (GTO) device
IGBT press pack housing

 

We offer Ceramic Tube in single, double and 4-bore tubing and oval double bore tubing at stocked lengths.  The sizes of these ceramic tubes range from .020” to 8.250” (.50mm – 209.55mm).

If a special shaped ceramic tube is required, please advise and we will be happy to quote.  Larger diameters and longer lengths available by quotation.  Please requestquote or contact us.

Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, isostatic pressing and extrusion productive technology etc
Item		Unit	95 Al2O3	96 Al2O3	99Al2O3
Physical Characteristics	Bulk density	g/cm3	3.6	3.6	3.9
	Water absorption	%	0	0	0
Mechanical Characteristics	Flexural strength	Mpa	320	340	360
	Hardness Vickers	Gpa	12.2	13.5	15.6
	Elastic modulus	Gpa	280	320	370
	Poisson’s ratio	-	0.22	0.23	0.23
Thermal Characteristics	Linear expansion coefficient	(200C-5000C) 10-6/0C	7.1	7.2	8
	Thermal conductivity	w/(m.k)	16	24	32
	Specific Heat	*10-3J/(kg*K)	0.78	0.78	0.9
Electrical Characteristics	Dielectric constant (1MHZ)	-	9	9.4	9.9
	Dielectric loss angle	*10-4	15	5	1
	Dielectric strength	*106V/m	12	15	15
Processing technology
Process range (mm)
Outside Diameter	1---300
Inside Diameter	0.5---300
Length	0.5---1200
Accuracy of working (mm)
Perpendicularity	0.01
Concentricity	0.01
Roundness	0.005
Straightness	0.005
Parallelism	0.01
Planeness	0.005
Roughness	0.05
Fit clearance	0.005

 We have our own factory.

 Our Office

 

Welcome to our factory!We would be your best choice!