1. Application

This production line works to produce pure aluminum rod or alloy aluminum rod（Al-Ti-B） in diameter ofφ9.5mm orφ12mm by means of continuous casting and rolling.

1. Composition

This production line is composed of melting furnace and holding furnace (prepared by user) 4-wheel casting machine and pouring ladle, roller shears, cast bar feed-in device, rolling mill, alloy rod cooling systems, coiler, electrical control system, rolling mill lubrication system and emulsion system, etc.

3.  Main Technical Data

3.1.Diameter of casting wheel:            φ1400 mm

3.2. Cast bar delivery speed:             2.72~7.35.mpm

3.3. Cross sectional area of cast bar:         1490 mm2          

3.4. Motor of casting machine:             4kW, AC, 1000rpm

3.5. Motor of rolling mill:                 220kw, 1000rpm

3.6. Final rolling speed:                    2.5~3.6m/sec.

3.7. Output:                             approx. 2.0~2.5 t/h

3.8. Outlet rod diameter:                  φ9.5mm, Φ12mm

3.9. Number of stands:                  12 (1 stand with horizontal roll, 1 stand with

vertical roll, 5 stands with Y-shaped rolls of

upper  driving, 5 stands with Y-shaped rolls of lower driving)

3.10. Pass system:                       Ellipse - circle+ arc triangle – circle

4.11. Nominal diameter of roll:                Φ255mm

3.12. Diameter of coil:                       Φ2000mm

3.13. Weight of coil:                      approx. 1.5~2 tons/basket

3.14. Total installed power:                    350kw（not include the power fo furnace）