Hydraulic Rock Splitter

Boulder Demolition/Concrete Demolition/Boulder Breaking/Rock Buster/Concrete Breaking/Non Explosive/Non Blasting

Blasting during mining: mining stone surface every 0.5 m distance to hit a hole, and then placed in the blasting, stone detached from the mountain. A number of holes to be played in the the rock vertical and horizontal direction, such as the exploitation of a long 10 meters wide and 6 meters high and six meters of stone, fight DIA 40 hole cumulative length of 310 m or more. Stone explosives often are broken into many pieces, the utilization rate of less than 30% of the stone. Explosives mined stone is labor intensive, time-consuming, but also caused a tremendous waste of resources.

Hydraulic splitting machine mining process:
The splitting machine mining, just open a few holes and some slots in the surface of the stone to be mined, and then splitting machine pixia stone. Mining the same 10 meters long and 6 meters wide, 6 meters of stone, just playing 10 holes, the cumulative length of 60 meters. Saw the slot between the two holes to open a 150 mm wide and 5 mm deep and then use the chip, the cumulative length of about 25 meters (Note: not slotted, but split surface flatness is not open to a good slot). And then split the gun into the hole in the the Pixia stone. The split stone splitter from the mountain as a whole, the flatness error generally within a few centimeters. Compared with splitting machine mining explosives blasting mining, splitting machine mining is clearly a cost-effective method of quarrying.
If I produced the powerful high-speed and efficient hydraulic rock drill perforated, used in conjunction with the splitter, then better show a cost-effective and practicality.