♦  Types of surge suppressed:
    Lightning Flash Surges , Power switching surges, Switching Inrush Current , and Electric Magnetic Pulse.

♦  Case of Devices:
    Metal structure case with anode treatment and sand blasting to prevent EMI interference of itself.

♦  Method of handling surge energy:
    Series mode surge energy absorbed and transferred to voltage.

♦  Suitable AC voltage:
    AC 100V-250V 50/60Hz ±10%.

♦  Max. load current allowed:
    1ψ3W 30A.

♦  Max. power capacity:
    7.5kW.

♦  Input Impedance (R) without loads:
    >10MΩ.

♦  Core module temperature of 30A load:
    Less than 55 oC.

♦  Surge immunity:
    1.2x50μs,10kV; 8x20μs,5kA combination wave, 20 sec interval, at least 3 times.

♦  Surge energy absorbing rate:
    1.2x50μs,10kV; 8x20μs,5kA combination wave, 99%±1% (ungrounding condition).

♦  After surge invasion, AC waveform recovering time:
    Less than10mS.

♦  After surge invasion, AC waveform correction ability:
    1-3A load condition, more than 3 cycles.

♦  EMP(fast transient/bust) immunity:
    4.5kV, 5x50ns EFT waveform, 95%±2% (ungrounding condition).

♦  Loads remnant voltage:
    650V±20% under combination wave tested.

♦  Load protection mode:
    L-N, L-G, and N-G.

♦  System ground resistance demand:
     None.

♦  Operation temperature range and humidity range:
    -40 to +85oC, 35 to 95% relative humidity (no dew).

♦  Dimension:
    Base 116mm (L)×82mm(W)/ Cover 116mm (L)×82mm(W)×21mm(H) ±1%.

♦  Weight:
    320g ±5%.

♦  Confirm standards:
    ANSI C62.41、IEC 61000-4-5、IEC 61000-4-4、IEC 61643-1、ANSI C37.90.1etc.

♦  Surge-testing:
    On-line condition, tested by10kV/5kA combination wave, 4.5kV, 5x50ns EFT wave.