DESCRIPTION

TYL®-Bond Breaker Tape is a polyethylene film with adhesive applied to one side which is used to separate the base of the sealant void from the joint filler thus ensuring a correct two-sided bond.  Where a joint sealant is applied to a square or rectangular void, the base of the void should be separated from the sealant.  This ensures that the sealant adheres to the vertical faces of the joint only and prevents a three-sided bond thereby avoiding premature sealant failure.  The Bond Breaker Tape also acts as an isolation strip when used on bitumen based joint filler boards thus preventing the bitumen in the board contaminating the joint sealant and preventing full cure of the sealant taking place. It can cover the full width of the groove.

Uses

1. Used in joint sealing applications to ensure sealant only adheres to two faces of the joint.

2. Isolating sealant and eliminating adhesion to filler boards.

Packaging

Width : 10, 20, 25, 38 and 50mm