001J Wiegand 26/34 Proximity Card Reader

 

 

Specification

 

• Less than 0.2 second Response Speed
• Less than 0.5 seconds Proximity Time Distance
• 2-15cm Proximity Range
• Support EM-ID 125Khz or 13.56Mhz mifare  card or keyfob
• Built-in Antenna
• Built-in LED (Double Color LED)
• Built-in Loud Speaker (Buzzer)
• DC 12V Working Voltage,70mA Working Current
• 100 Meters Communication Distance
• Real Time Data Transfer
• Black Color
• PVC Case Material (Black Resin for Water-Proof Function)
• 103*48mm*21mm

 

 

 Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

 

Wire Connection

 

WG26/34            

Red: DC 12V 

Black:GND    

Green:D0       

White:D1 

Yellow: LED

Blue: Beep

Brown: WG34 connect to Ground (GND)

 

Notice

 

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

 

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

 

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires