CONSTRUCTION:

Main body compacting ram of the compactor is made up of rectangular steel of 6mm thick. The faces of the compacting ram are made from 20 mm thick plate.

Inside of the compactor is painted with primer. All parts outside the compactor are painted with Hammer grey paint or any another color according to the client’s requirement.

A.    Panel Class: IP65

B.     Equipped with two modes manual or auto

In manual mode all hydraulic components can be operated separately. In case of Auto mode faults. By using push button mounted in the panel face

In Auto mode using photocell to start compactor operation. The photocells are protected against foreign material stack to them by using steel cover fixed inside the compactors hopper. 

A.    Oil temperature shut down switch with indication lamp ( oil high temperature )

B.     Motor trip lamp in case motor overload.

C.     Equipped with fan for cooling electrical components inside the panel.

D.    All electrical components are labeled inside and outside the panel for easy repairing and faultfinding.

E.     Incase of stacking of the pressing cylinder or any reason the system will be stopped or gate cylinder automatically after preset time.

 

Hydraulic Cylinders: One main pressing cylinder designed for easily installing and dismantling.

Power Pack:Equipped with all required components from Gear Pump, Suction, Filters, Solenoid valves, Relief valve, Pressure Gauge and Pressure Switch

Electrical motors: .5KW, 3Phase, 380 Volts, 50Hz, 1460 rpm / Or 1.5KW, 1Phase, 220 Volts, 50/60Hz, 1460 rpm

Compacting capacity: 10 ton

The tank is equipped with high oil temperature switch to stop the system in case of oil high temperature.

A.    Refer to attached drawing

B.     Weight ~600 kg