Sodium alginate level dyeing and printing purposes

This paste

Sodium alginate used as warp sizing, pulp, printing slurry, etc. Has a long history, but mainly used in printing paste, sodium alginate used as reactive dye paste, with its unique performance. Fibers with reactive dyes chemical reaction, will the dye on the fiber, the dyeing process used in the printing paste should not interfere with or participate in chemical bonding. If paste in response, will be fixed on the fiber, it can make fibre dyed hair feel hard, brittle, colour and lustre is bad. When using sodium alginate for printing slurry, neither affect the dyeing process of reactive dyes and fibers, at the same time the printed pattern is clear, colorful, color quantity is high, feel is good, suitable for cotton fabric color not only, also suitable for wool, silk, synthetic fiber printing. Medium and low viscosity of sodium alginate viscosity is suitable for screen printing to the drum type from printing paste. In fact prepared with low viscosity of sodium alginate for printing on the plasma is relatively stable. This made it possible to preparation of higher content of printing paste, the printing paste can lead to the drying process of dense membrane, increase the tinctorial yield.

Synthetic fiber

Sodium alginate and the short asbestos fiber blend, after solidification treatment, calcium acetate solution can prevent the asbestos fibers float in the sky, affect human body health.

Sodium alginate and dyeing quality indicators

Project level dyeing and printing

Particle size 30 mesh by 100%