Addition Molding Silicone

Model:	HYE620# HYE630
Brand:	HY silicone rubber
Origin:	Made In China
Category:	Chemicals / Rubber Materials
Label:	Addition Molding , Molding
Price:	US $15.2 / kg
Min. Order:	200 kg

Inquire Now

Product Description

addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.

Applications

HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Operation instruction of HY-E642# molding silicone:

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

For getting further information about RTV-2 silicone rubber, PLS contact with Mr Damer

TEL: +86-755-89948019

Mobile: +86-15211795080

Email: zx868790(at)gmail(dot)com or zx868790(at)yahoo(dot)cn

Website : www(dot)szrl(dot)net

Member Information

Hongkong Hong Ye Jie Technology Co.,Ltd
Country/Region:	Guang Dong - China
Business Nature:	Manufacturer
Phone:	13243825997
Contact:	Moe Chai (sales manager)
Last Online:	26 Mar, 2014