Split type infrared sensor faucet, induction running, leave off the water
· Infrared microprocessor using dual sealant protection, avoid intrusion from humid moisture.
· The main body of faucet using brass tube manufactured of international standard.
· Plating had been through Salt Spray Test for 24 hours to reach national standard.
· To use stainless steel bubbler will effluent water softer and prevent water-drop splash.
· There had been set prevent clogging device inside the solenoid valve, can be avoided sand to block.
· With more than 60 seconds to cut off the water function, to avoid that some obstacles stay within sensing range result in wasting the water resource.

The Major Parameter
· The faucet body material: solid brass with chrome finish
· Power supply: AC 220V or DC 6V (4pcs AA alkaline batteries)
· Battery life: 150,000 cycles
· Sensing range: 8cm to 18cm (automatic adjustable)
· Working temperature: 1-60℃
· Water pressure: 0.07Mpa-0.7Mpa
· Water interface: G1/2” external thread
· Installation aperture: haplopore (32mm)
· Response time: less than 0.7 seconds
· Water stop protection: 60 seconds
· Rated flow: when it under 0.3Mpa less than 3L/S