This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, times welding . Welding by electromotor ; the hopper adopts the steeping motor; brake motor wheels ;pulling the wire net is controlled by the steeping motor . The line wire and the weft wire are pre-straight and pre-cut . The greatest advantage is  you can adjust the distance of weft wire at random on the same one piece wire mesh sheet.

 

Wire diameter : 3.0-6.0mm

Line wire  form : precut wire

Weft wire distance : 25-200mm

Weft wire form : precut wire

Line wire distance : 50-300mm

Rated voltage : 380V

Welding net width : 2500mm

Rated power : 125KVAx6

Welding speed : 30times/min

Overall dimension : 3100x7900x1900mm

Welding No. : 51

Length wire net : 6000mm

 

Application:

Fence mesh (highway ,railway, hills) , building roof wire net